Gjsify LogoGjsify Logo

Hierarchy

Index

Constructors

Properties

g_type_instance: TypeInstance
$gtype: GType<Cogl.Texture>
name: string

Methods

  • allocate(): number
  • Explicitly allocates the storage for the given texture which allows you to be sure that there is enough memory for the texture and if not then the error can be handled gracefully.

    Normally applications don't need to use this api directly since the texture will be implicitly allocated when data is set on the texture, or if the texture is attached to a #CoglOffscreen framebuffer and rendered too.

    Returns number

  • Creates a binding between source_property on source and target_property on target.

    Whenever the source_property is changed the target_property is updated using the same value. For instance:

      g_object_bind_property (action, "active", widget, "sensitive", 0);
    

    Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

    If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

    The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

    Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

    A #GObject can have multiple bindings.

    Parameters

    • source_property: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • target_property: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    Returns Binding

  • Creates a binding between source_property on source and target_property on target, allowing you to set the transformation functions to be used by the binding.

    This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

    Parameters

    • source_property: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • target_property: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    • transform_to: TClosure<any, any>

      a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default

    • transform_from: TClosure<any, any>

      a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default

    Returns Binding

  • connect(sigName: string, callback: ((...args: any[]) => void)): number
  • connect_after(sigName: string, callback: ((...args: any[]) => void)): number
  • disconnect(id: number): void
  • emit(sigName: string, ...args: any[]): void
  • force_floating(): void
  • This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().

    Returns void

  • freeze_notify(): void
  • Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.

    This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

    Returns void

  • Queries what components the given texture stores internally as set via cogl_texture_set_components().

    For textures created by the ‘_with_size’ constructors the default is %COGL_TEXTURE_COMPONENTS_RGBA. The other constructors which take a %CoglBitmap or a data pointer default to the same components as the pixel format of the data.

    Returns Cogl.TextureComponents

  • get_data(format?: Cogl.PixelFormat, rowstride?: number, data?: number): number
  • get_data(key?: string): object
  • get_data(...args: any[]): any
  • get_data(args_or_key?: string | any[]): any
  • Copies the pixel data from a cogl texture to system memory.

    Don't pass the value of cogl_texture_get_rowstride() as the rowstride argument, the rowstride should be the rowstride you want for the destination data buffer not the rowstride of the source texture

    Parameters

    • Optional format: Cogl.PixelFormat

      the #CoglPixelFormat to store the texture as.

    • Optional rowstride: number

      the rowstride of data in bytes or pass 0 to calculate from the bytes-per-pixel of format multiplied by the texture width.

    • Optional data: number

      memory location to write the texture's contents, or %NULL to only query the data size through the return value.

    Returns number

  • Gets a named field from the objects table of associations (see g_object_set_data()).

    Parameters

    • Optional key: string

      name of the key for that association

    Returns object

  • Parameters

    • Rest ...args: any[]

    Returns any

  • Parameters

    • Optional args_or_key: string | any[]

    Returns any

  • get_gl_texture(): [number, number, number]
  • Queries the GL handles for a GPU side texture through its #CoglTexture.

    If the texture is spliced the data for the first sub texture will be queried.

    Returns [number, number, number]

  • get_height(): number
  • get_max_waste(): number
  • get_premultiplied(): number
  • Queries the pre-multiplied alpha status for internally stored red, green and blue components for the given texture as set by cogl_texture_set_premultiplied().

    By default the pre-multipled state is TRUE.

    Returns number

  • get_property(property_name?: string, value?: any): void
  • Gets a property of an object.

    The value can be:

    • an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
    • a #GValue initialized with the expected type of the property
    • a #GValue initialized with a type to which the expected type of the property can be transformed

    In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

    Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

    Parameters

    • Optional property_name: string

      the name of the property to get

    • Optional value: any

      return location for the property value

    Returns void

  • get_qdata(quark: number): object
  • get_width(): number
  • getv(names: string[], values: any[]): void
  • Gets n_properties properties for an object. Obtained properties will be set to values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.

    Parameters

    • names: string[]

      the names of each property to get

    • values: any[]

      the values of each property to get

    Returns void

  • is_floating(): boolean
  • is_sliced(): number
  • notify(property_name: string): void
  • Emits a "notify" signal for the property property_name on object.

    When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

    Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

    Parameters

    • property_name: string

      the name of a property installed on the class of object.

    Returns void

  • Emits a "notify" signal for the property specified by pspec on object.

    This function omits the property name lookup, hence it is faster than g_object_notify().

    One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

      enum
    {
    PROP_0,
    PROP_FOO,
    PROP_LAST
    };

    static GParamSpec *properties[PROP_LAST];

    static void
    my_object_class_init (MyObjectClass *klass)
    {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
    0, 100,
    50,
    G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
    PROP_FOO,
    properties[PROP_FOO]);
    }

    and then notify a change on the "foo" property with:

      g_object_notify_by_pspec (self, properties[PROP_FOO]);
    

    Parameters

    • pspec: ParamSpec

      the #GParamSpec of a property installed on the class of object.

    Returns void

  • Increases the reference count of object.

    Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

    Returns GObject.Object

  • Increase the reference count of object, and possibly remove the [floating][floating-ref] reference, if object has a floating reference.

    In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

    Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

    Returns GObject.Object

  • run_dispose(): void
  • Releases all references to other objects. This can be used to break reference cycles.

    This function should only be called from object system implementations.

    Returns void

  • Affects the internal storage format for this texture by specifying what components will be required for sampling later.

    This api affects how data is uploaded to the GPU since unused components can potentially be discarded from source data.

    For textures created by the ‘_with_size’ constructors the default is %COGL_TEXTURE_COMPONENTS_RGBA. The other constructors which take a %CoglBitmap or a data pointer default to the same components as the pixel format of the data.

    Note that the %COGL_TEXTURE_COMPONENTS_RG format is not available on all drivers. The availability can be determined by checking for the %COGL_FEATURE_ID_TEXTURE_RG feature. If this format is used on a driver where it is not available then %COGL_TEXTURE_ERROR_FORMAT will be raised when the texture is allocated. Even if the feature is not available then %COGL_PIXEL_FORMAT_RG_88 can still be used as an image format as long as %COGL_TEXTURE_COMPONENTS_RG isn't used as the texture's components.

    Parameters

    Returns void

  • set_data(key: string, data?: object): void
  • Each object carries around a table of associations from strings to pointers. This function lets you set an association.

    If the object already had an association with that name, the old association will be destroyed.

    Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

    Parameters

    • key: string

      name of the key

    • Optional data: object

      data to associate with that key

    Returns void

  • set_premultiplied(premultiplied: number): void
  • Affects the internal storage format for this texture by specifying whether red, green and blue color components should be stored as pre-multiplied alpha values.

    This api affects how data is uploaded to the GPU since Cogl will convert source data to have premultiplied or unpremultiplied components according to this state.

    For example if you create a texture via cogl_texture_2d_new_with_size() and then upload data via cogl_texture_set_data() passing a source format of %COGL_PIXEL_FORMAT_RGBA_8888 then Cogl will internally multiply the red, green and blue components of the source data by the alpha component, for each pixel so that the internally stored data has pre-multiplied alpha components. If you instead upload data that already has pre-multiplied components by passing %COGL_PIXEL_FORMAT_RGBA_8888_PRE as the source format to cogl_texture_set_data() then the data can be uploaded without being converted.

    By default the premultipled state is TRUE.

    Parameters

    • premultiplied: number

      Whether any internally stored red, green or blue components are pre-multiplied by an alpha component.

    Returns void

  • set_property(property_name: string, value?: any): void
  • set_region(src_x: number, src_y: number, dst_x: number, dst_y: number, dst_width: number, dst_height: number, width: number, height: number, format: Cogl.PixelFormat, rowstride: number, data: number): number
  • Sets the pixels in a rectangular subregion of texture from an in-memory buffer containing pixel data.

    The region set can't be larger than the source data</note>

    Parameters

    • src_x: number

      upper left coordinate to use from source data.

    • src_y: number

      upper left coordinate to use from source data.

    • dst_x: number

      upper left destination horizontal coordinate.

    • dst_y: number

      upper left destination vertical coordinate.

    • dst_width: number

      width of destination region to write. (Must be less than or equal to width)

    • dst_height: number

      height of destination region to write. (Must be less than or equal to height)

    • width: number

      width of source data buffer.

    • height: number

      height of source data buffer.

    • format: Cogl.PixelFormat

      the #CoglPixelFormat used in the source buffer.

    • rowstride: number

      rowstride of source buffer (computed from width if none specified)

    • data: number

      the actual pixel data.

    Returns number

  • steal_data(key?: string): object
  • Remove a specified datum from the object's data associations, without invoking the association's destroy handler.

    Parameters

    • Optional key: string

      name of the key

    Returns object

  • steal_qdata(quark: number): object
  • This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example:

    void
    object_add_to_user_list (GObject *object,
    const gchar *new_string)
    {
    // the quark, naming the object data
    GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
    // retrieve the old string list
    GList *list = g_object_steal_qdata (object, quark_string_list);

    // prepend new string
    list = g_list_prepend (list, g_strdup (new_string));
    // this changed 'list', so we need to set it again
    g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
    }
    static void
    free_string_list (gpointer data)
    {
    GList *node, *list = data;

    for (node = list; node; node = node->next)
    g_free (node->data);
    g_list_free (list);
    }

    Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

    Parameters

    • quark: number

      A #GQuark, naming the user data pointer

    Returns object

  • thaw_notify(): void
  • Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted.

    Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

    It is an error to call this function when the freeze count is zero.

    Returns void

  • unref(): void
  • Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).

    If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.

    Returns void

  • vfunc_constructed(): void
  • vfunc_dispatch_properties_changed(n_pspecs: number, pspecs: ParamSpec): void
  • vfunc_dispose(): void
  • vfunc_finalize(): void
  • vfunc_get_property(property_id: number, value?: any, pspec?: ParamSpec): void
  • Emits a "notify" signal for the property property_name on object.

    When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

    Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

    virtual

    Parameters

    Returns void

  • vfunc_set_property(property_id: number, value?: any, pspec?: ParamSpec): void
  • watch_closure(closure: TClosure<any, any>): void
  • This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.

    Parameters

    • closure: TClosure<any, any>

      #GClosure to watch

    Returns void

  • compat_control(what: number, data: object): number
  • Find the #GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • g_iface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    • property_name: string

      name of a property to look up.

    Returns ParamSpec

  • Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.

    This function is meant to be called from the interface's default vtable initialization function (the class_init member of #GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface.

    If pspec is a floating reference, it will be consumed.

    Parameters

    • g_iface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface.

    • pspec: ParamSpec

      the #GParamSpec for the new property

    Returns void

  • Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • g_iface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    Returns ParamSpec[]

  • Creates a new instance of a #GObject subtype and sets its properties.

    Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.

    Parameters

    • object_type: GType<unknown>

      the type id of the #GObject subtype to instantiate

    • parameters: GObject.Parameter[]

      an array of #GParameter

    Returns GObject.Object

Legend

  • Module
  • Object literal
  • Variable
  • Function
  • Function with type parameter
  • Index signature
  • Type alias
  • Type alias with type parameter
  • Enumeration
  • Enumeration member
  • Property
  • Method
  • Interface
  • Interface with type parameter
  • Constructor
  • Property
  • Method
  • Index signature
  • Class
  • Class with type parameter
  • Constructor
  • Property
  • Method
  • Accessor
  • Index signature
  • Inherited constructor
  • Inherited property
  • Inherited method
  • Inherited accessor
  • Protected property
  • Protected method
  • Protected accessor
  • Private property
  • Private method
  • Private accessor
  • Static property
  • Static method