Appends a new row to tree_store. If parent is non-%NULL, then it will append the
new row after the last child of parent, otherwise it will append a row to
the top level. iter will be changed to point to this new row. The row will
be empty after this function is called. To fill in values, you need to call
gtk_tree_store_set() or gtk_tree_store_set_value().
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
Removes all rows from tree_store
This is similar to gtk_buildable_parser_finished() but is
called once for each custom tag handled by the buildable.
a #GtkBuilder
child object or %NULL for non-child tags
the name of the tag
user data created in custom_tag_start
This is called at the end of each custom element handled by the buildable.
#GtkBuilder used to construct this object
child object or %NULL for non-child tags
name of tag
user data that will be passed in to parser functions
This is called for each unknown element under <child>.
a #GtkBuilder used to construct this object
child object or %NULL for non-child tags
name of tag
Asks the #GtkTreeDragSource to delete the row at path, because
it was moved somewhere else via drag-and-drop. Returns %FALSE
if the deletion fails because path no longer exists, or for
some model-specific reason. Should robustly handle a path no
longer found in the model!
Asks the #GtkTreeDragSource to fill in selection_data with a
representation of the row at path. selection_data->target gives
the required type of the data. Should robustly handle a path no
longer found in the model!
row that was dragged
a #GtkSelectionData to fill with data from the dragged row
Asks the #GtkTreeDragDest to insert a row before the path dest,
deriving the contents of the row from selection_data. If dest is
outside the tree so that inserting before it is impossible, %FALSE
will be returned. Also, %FALSE may be returned if the new row is
not created for some model-specific reason. Should robustly handle
a dest no longer found in the model!
row to drop in front of
data to drop
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Calls func on each node in model in a depth-first fashion.
If func returns %TRUE, then the tree ceases to be walked,
and gtk_tree_model_foreach() returns.
a function to be called on each row
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Returns the type of the column.
the column index
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Returns a set of flags supported by this interface.
The flags are a bitwise combination of #GtkTreeModelFlags.
The flags supported should not change during the lifetime
of the tree_model.
Gets the manager to be edited.
Returns the number of columns supported by tree_model.
Gets the name of the buildable object.
#GtkBuilder sets the name based on the
[GtkBuilder UI definition][BUILDER-UI]
used to construct the buildable.
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Get the theme to be edited.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Returns %TRUE if the model has a default sort function. This is used primarily by GtkTreeViewColumns in order to determine if a model can go back to the default state, or not.
Creates a new row at position. If parent is non-%NULL, then the row will be
made a child of parent. Otherwise, the row will be created at the toplevel.
If position is -1 or is larger than the number of rows at that level, then
the new row will be inserted to the end of the list. iter will be changed
to point to this new row. The row will be empty after this function is
called. To fill in values, you need to call gtk_tree_store_set() or
gtk_tree_store_set_value().
A valid #GtkTreeIter, or %NULL
position to insert the new row, or -1 for last
Inserts a new row after sibling. If sibling is %NULL, then the row will be
prepended to parent ’s children. If parent and sibling are %NULL, then
the row will be prepended to the toplevel. If both sibling and parent are
set, then parent must be the parent of sibling. When sibling is set,
parent is optional.
iter will be changed to point to this new row. The row will be empty after
this function is called. To fill in values, you need to call
gtk_tree_store_set() or gtk_tree_store_set_value().
A valid #GtkTreeIter, or %NULL
A valid #GtkTreeIter, or %NULL
Inserts a new row before sibling. If sibling is %NULL, then the row will
be appended to parent ’s children. If parent and sibling are %NULL, then
the row will be appended to the toplevel. If both sibling and parent are
set, then parent must be the parent of sibling. When sibling is set,
parent is optional.
iter will be changed to point to this new row. The row will be empty after
this function is called. To fill in values, you need to call
gtk_tree_store_set() or gtk_tree_store_set_value().
A valid #GtkTreeIter, or %NULL
A valid #GtkTreeIter, or %NULL
A variant of gtk_tree_store_insert_with_values() which takes the columns and values as two arrays, instead of varargs. This function is mainly intended for language bindings.
A valid #GtkTreeIter, or %NULL
position to insert the new row, or -1 for last
an array of column numbers
an array of GValues
Checks whether object has a [floating][floating-ref] reference.
Sets iter to point to the first child of parent.
If parent has no children, %FALSE is returned and iter is
set to be invalid. parent will remain a valid node after this
function has been called.
If parent is %NULL returns the first node, equivalent to
gtk_tree_model_get_iter_first (tree_model, iter);
Sets iter to be the child of parent, using the given index.
The first index is 0. If n is too big, or parent has no children,
iter is set to an invalid iterator and %FALSE is returned. parent
will remain a valid node after this function has been called. As a
special case, if parent is %NULL, then the n-th root node
is set.
the #GtkTreeIter-struct to get the child from, or %NULL.
the index of the desired child
Sets iter to be the parent of child.
If child is at the toplevel, and doesn’t have a parent, then
iter is set to an invalid iterator and %FALSE is returned.
child will remain a valid node after this function has been
called.
iter will be initialized before the lookup is performed, so child
and iter cannot point to the same memory location.
Moves iter in tree_store to the position after position. iter and
position should be in the same level. Note that this function only
works with unsorted stores. If position is %NULL, iter will be moved
to the start of the level.
Moves iter in tree_store to the position before position. iter and
position should be in the same level. Note that this function only
works with unsorted stores. If position is %NULL, iter will be
moved to the end of the level.
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Prepends a new row to tree_store. If parent is non-%NULL, then it will prepend
the new row before the first child of parent, otherwise it will prepend a row
to the top level. iter will be changed to point to this new row. The row
will be empty after this function is called. To fill in values, you need to
call gtk_tree_store_set() or gtk_tree_store_set_value().
Lets the tree ref the node.
This is an optional method for models to implement. To be more specific, models may ignore this call as it exists primarily for performance reasons.
This function is primarily meant as a way for views to let caching models know when nodes are being displayed (and hence, whether or not to cache that node). Being displayed means a node is in an expanded branch, regardless of whether the node is currently visible in the viewport. For example, a file-system based model would not want to keep the entire file-hierarchy in memory, just the sections that are currently being displayed by every current view.
A model should be expected to be able to get an iter independent of its reffed state.
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Emits the #GtkTreeModel::row-deleted signal on tree_model.
This should be called by models after a row has been removed.
The location pointed to by path should be the location that
the row previously was at. It may not be a valid location anymore.
Nodes that are deleted are not unreffed, this means that any outstanding references on the deleted node should not be released.
Determines whether a drop is possible before the given dest_path,
at the same depth as dest_path. i.e., can we drop the data in
selection_data at that location. dest_path does not have to
exist; the return value will almost certainly be %FALSE if the
parent of dest_path doesn’t exist, though.
destination row
the data being dragged
Emits the #GtkTreeModel::row-has-child-toggled signal on
tree_model. This should be called by models after the child
state of a node changes.
a #GtkTreePath-struct pointing to the changed row
a valid #GtkTreeIter-struct pointing to the changed row
Emits the #GtkTreeModel::rows-reordered signal on tree_model.
This should be called by models when their rows have been reordered.
a #GtkTreePath-struct pointing to the tree node whose children have been reordered
a valid #GtkTreeIter-struct pointing to the node whose children have been reordered, or %NULL if the depth of path is 0
an array of integers mapping the current position of each child to its old position before the re-ordering, i.e. new_order``[newpos] = oldpos
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
A variant of gtk_tree_store_set_valist() which takes the columns and values as two arrays, instead of varargs. This function is mainly intended for language bindings or in case the number of columns to change is not known until run-time.
A valid #GtkTreeIter for the row being modified
an array of column numbers
an array of GValues
This function is meant primarily for #GObjects that inherit from #GtkTreeStore, and should only be used when constructing a new #GtkTreeStore. It will not function after a row has been added, or a method on the #GtkTreeModel interface is called.
An array of #GType types, one for each column
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Sets the default comparison function used when sorting to be sort_func.
If the current sort column id of sortable is
%GTK_TREE_SORTABLE_DEFAULT_SORT_COLUMN_ID, then the model will sort using
this function.
If sort_func is %NULL, then there will be no default comparison function.
This means that once the model has been sorted, it can’t go back to the
default state. In this case, when the current sort column id of sortable
is %GTK_TREE_SORTABLE_DEFAULT_SORT_COLUMN_ID, the model will be unsorted.
The comparison function
Sets the name of the buildable object.
name to set
Sets a property on an object.
the name of the property to set
the value
Sets the current sort column to be sort_column_id. The sortable will
resort itself to reflect this change, after emitting a
#GtkTreeSortable::sort-column-changed signal. sort_column_id may either be
a regular column id, or one of the following special values:
%GTK_TREE_SORTABLE_DEFAULT_SORT_COLUMN_ID: the default sort function will be used, if it is set
%GTK_TREE_SORTABLE_UNSORTED_SORT_COLUMN_ID: no sorting will occur
Sets the comparison function used when sorting to be sort_func. If the
current sort column id of sortable is the same as sort_column_id, then
the model will sort using this function.
the sort column id to set the function for
The comparison function
Emits a #GtkTreeSortable::sort-column-changed signal on sortable.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
Lets the tree unref the node.
This is an optional method for models to implement. To be more specific, models may ignore this call as it exists primarily for performance reasons. For more information on what this means, see gtk_tree_model_ref_node().
Please note that nodes that are deleted are not unreffed.
This is similar to gtk_buildable_parser_finished() but is
called once for each custom tag handled by the buildable.
a #GtkBuilder
child object or %NULL for non-child tags
the name of the tag
user data created in custom_tag_start
This is called at the end of each custom element handled by the buildable.
#GtkBuilder used to construct this object
child object or %NULL for non-child tags
name of tag
user data that will be passed in to parser functions
This is called for each unknown element under <child>.
a #GtkBuilder used to construct this object
child object or %NULL for non-child tags
name of tag
Asks the #GtkTreeDragSource to delete the row at path, because
it was moved somewhere else via drag-and-drop. Returns %FALSE
if the deletion fails because path no longer exists, or for
some model-specific reason. Should robustly handle a path no
longer found in the model!
Asks the #GtkTreeDragSource to fill in selection_data with a
representation of the row at path. selection_data->target gives
the required type of the data. Should robustly handle a path no
longer found in the model!
row that was dragged
a #GtkSelectionData to fill with data from the dragged row
Asks the #GtkTreeDragDest to insert a row before the path dest,
deriving the contents of the row from selection_data. If dest is
outside the tree so that inserting before it is impossible, %FALSE
will be returned. Also, %FALSE may be returned if the new row is
not created for some model-specific reason. Should robustly handle
a dest no longer found in the model!
row to drop in front of
data to drop
Returns the type of the column.
the column index
Returns a set of flags supported by this interface.
The flags are a bitwise combination of #GtkTreeModelFlags.
The flags supported should not change during the lifetime
of the tree_model.
Returns the number of columns supported by tree_model.
Gets the name of the buildable object.
#GtkBuilder sets the name based on the
[GtkBuilder UI definition][BUILDER-UI]
used to construct the buildable.
Returns %TRUE if the model has a default sort function. This is used primarily by GtkTreeViewColumns in order to determine if a model can go back to the default state, or not.
Sets iter to point to the first child of parent.
If parent has no children, %FALSE is returned and iter is
set to be invalid. parent will remain a valid node after this
function has been called.
If parent is %NULL returns the first node, equivalent to
gtk_tree_model_get_iter_first (tree_model, iter);
Sets iter to be the child of parent, using the given index.
The first index is 0. If n is too big, or parent has no children,
iter is set to an invalid iterator and %FALSE is returned. parent
will remain a valid node after this function has been called. As a
special case, if parent is %NULL, then the n-th root node
is set.
the #GtkTreeIter-struct to get the child from, or %NULL.
the index of the desired child
Sets iter to be the parent of child.
If child is at the toplevel, and doesn’t have a parent, then
iter is set to an invalid iterator and %FALSE is returned.
child will remain a valid node after this function has been
called.
iter will be initialized before the lookup is performed, so child
and iter cannot point to the same memory location.
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
Lets the tree ref the node.
This is an optional method for models to implement. To be more specific, models may ignore this call as it exists primarily for performance reasons.
This function is primarily meant as a way for views to let caching models know when nodes are being displayed (and hence, whether or not to cache that node). Being displayed means a node is in an expanded branch, regardless of whether the node is currently visible in the viewport. For example, a file-system based model would not want to keep the entire file-hierarchy in memory, just the sections that are currently being displayed by every current view.
A model should be expected to be able to get an iter independent of its reffed state.
Emits the #GtkTreeModel::row-deleted signal on tree_model.
This should be called by models after a row has been removed.
The location pointed to by path should be the location that
the row previously was at. It may not be a valid location anymore.
Nodes that are deleted are not unreffed, this means that any outstanding references on the deleted node should not be released.
Determines whether a drop is possible before the given dest_path,
at the same depth as dest_path. i.e., can we drop the data in
selection_data at that location. dest_path does not have to
exist; the return value will almost certainly be %FALSE if the
parent of dest_path doesn’t exist, though.
destination row
the data being dragged
Emits the #GtkTreeModel::row-has-child-toggled signal on
tree_model. This should be called by models after the child
state of a node changes.
a #GtkTreePath-struct pointing to the changed row
a valid #GtkTreeIter-struct pointing to the changed row
Sets the default comparison function used when sorting to be sort_func.
If the current sort column id of sortable is
%GTK_TREE_SORTABLE_DEFAULT_SORT_COLUMN_ID, then the model will sort using
this function.
If sort_func is %NULL, then there will be no default comparison function.
This means that once the model has been sorted, it can’t go back to the
default state. In this case, when the current sort column id of sortable
is %GTK_TREE_SORTABLE_DEFAULT_SORT_COLUMN_ID, the model will be unsorted.
The comparison function
Sets the name of the buildable object.
name to set
Sets the current sort column to be sort_column_id. The sortable will
resort itself to reflect this change, after emitting a
#GtkTreeSortable::sort-column-changed signal. sort_column_id may either be
a regular column id, or one of the following special values:
%GTK_TREE_SORTABLE_DEFAULT_SORT_COLUMN_ID: the default sort function will be used, if it is set
%GTK_TREE_SORTABLE_UNSORTED_SORT_COLUMN_ID: no sorting will occur
Sets the comparison function used when sorting to be sort_func. If the
current sort column id of sortable is the same as sort_column_id, then
the model will sort using this function.
the sort column id to set the function for
The comparison function
Emits a #GtkTreeSortable::sort-column-changed signal on sortable.
Lets the tree unref the node.
This is an optional method for models to implement. To be more specific, models may ignore this call as it exists primarily for performance reasons. For more information on what this means, see gtk_tree_model_ref_node().
Please note that nodes that are deleted are not unreffed.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
Adds a child to
buildable.typeis an optional string describing how the child should be added.