Class BufferedOutputStream

Whenever the source_property is changed the target_property is updated using the same value. For instance:

  g_object_bind_property (action, "active", widget, "sensitive", 0);

Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

A #GObject can have multiple bindings.

This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

Once the stream is closed, all other operations will return %G_IO_ERROR_CLOSED. Closing a stream multiple times will not return an error.

Closing a stream will automatically flush any outstanding buffers in the stream.

Streams will be automatically closed when the last reference is dropped, but you might want to call this function to make sure resources are released as early as possible.

Some streams might keep the backing store of the stream (e.g. a file descriptor) open after the stream is closed. See the documentation for the individual stream for details.

On failure the first error that happened will be reported, but the close operation will finish as much as possible. A stream that failed to close will still return %G_IO_ERROR_CLOSED for all operations. Still, it is important to check and report the error to the user, otherwise there might be a loss of data as all data might not be written.

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. Cancelling a close will still leave the stream closed, but there some streams can use a faster close that doesn't block to e.g. check errors. On cancellation (as with any error) there is no guarantee that all written data will reach the target.

For behaviour details see g_output_stream_close().

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

This function is optional for inherited classes.

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.

When the operation is finished callback will be called. You can then call g_output_stream_flush_finish() to get the result of the operation.

This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

The value can be:

• an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
• a #GValue initialized with the expected type of the property
• a #GValue initialized with a type to which the expected type of the property can be transformed

In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

This function omits the property name lookup, hence it is faster than g_object_notify().

One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

  enum
  {
    PROP_0,
    PROP_FOO,
    PROP_LAST
  };

  static GParamSpec *properties[PROP_LAST];

  static void
  my_object_class_init (MyObjectClass *klass)
  {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
                                             0, 100,
                                             50,
                                             G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
                                     PROP_FOO,
                                     properties[PROP_FOO]);
  }

and then notify a change on the "foo" property with:

  g_object_notify_by_pspec (self, properties[PROP_FOO]);

Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

This function should only be called from object system implementations.

Attempting to seek past the end of the stream will have different results depending on if the stream is fixed-sized or resizable. If the stream is resizable then seeking past the end and then writing will result in zeros filling the empty space. Seeking past the end of a resizable stream and reading will result in EOF. Seeking past the end of a fixed-sized stream will fail.

Any operation that would result in a negative offset will fail.

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.

If the object already had an association with that name, the old association will be destroyed.

Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

For the synchronous, blocking version of this function, see g_output_stream_splice().

void
object_add_to_user_list (GObject     *object,
                         const gchar *new_string)
{
  // the quark, naming the object data
  GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
  // retrieve the old string list
  GList *list = g_object_steal_qdata (object, quark_string_list);

  // prepend new string
  list = g_list_prepend (list, g_strdup (new_string));
  // this changed 'list', so we need to set it again
  g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
  GList *node, *list = data;

  for (node = list; node; node = node->next)
    g_free (node->data);
  g_list_free (list);
}

Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

It is an error to call this function when the freeze count is zero.

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an operation was partially finished when the operation was cancelled the partial result will be returned, without an error.

If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.

For behaviour details see g_output_stream_close().

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

This function is optional for inherited classes.

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.

When the operation is finished callback will be called. You can then call g_output_stream_flush_finish() to get the result of the operation.

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

Attempting to seek past the end of the stream will have different results depending on if the stream is fixed-sized or resizable. If the stream is resizable then seeking past the end and then writing will result in zeros filling the empty space. Seeking past the end of a resizable stream and reading will result in EOF. Seeking past the end of a fixed-sized stream will fail.

Any operation that would result in a negative offset will fail.

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.

For the synchronous, blocking version of this function, see g_output_stream_splice().

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an operation was partially finished when the operation was cancelled the partial result will be returned, without an error.

During an async request no other sync and async calls are allowed, and will result in %G_IO_ERROR_PENDING errors.

A value of count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.

On success, the number of bytes written will be passed to the callback. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, but generally we try to write as many bytes as requested.

You are guaranteed that this method will never fail with %G_IO_ERROR_WOULD_BLOCK - if stream can't accept more data, the method will just wait until this changes.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

For the synchronous, blocking version of this function, see g_output_stream_write().

Note that no copy of buffer will be made, so it must stay valid until callback is called. See g_output_stream_write_bytes_async() for a #GBytes version that will automatically hold a reference to the contents (without copying) for the duration of the call.

If count is 0, returns 0 and does nothing. A value of count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.

On success, the number of bytes written to the stream is returned. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, or if there is not enough storage in the stream. All writes block until at least one byte is written or an error occurs; 0 is never returned (unless count is 0).

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an operation was partially finished when the operation was cancelled the partial result will be returned, without an error.

On error -1 is returned and error is set accordingly.

During an async request no other sync and async calls are allowed, and will result in %G_IO_ERROR_PENDING errors.

On success, the number of bytes written will be passed to the callback. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, but generally we try to write as many bytes as requested.

You are guaranteed that this method will never fail with %G_IO_ERROR_WOULD_BLOCK — if stream can't accept more data, the method will just wait until this changes.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

For the synchronous, blocking version of this function, see g_output_stream_writev().

Note that no copy of vectors will be made, so it must stay valid until callback is called.

If n_vectors is 0 or the sum of all bytes in vectors is 0, returns 0 and does nothing.

On success, the number of bytes written to the stream is returned. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, or if there is not enough storage in the stream. All writes block until at least one byte is written or an error occurs; 0 is never returned (unless n_vectors is 0 or the sum of all bytes in vectors is 0).

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an operation was partially finished when the operation was cancelled the partial result will be returned, without an error.

Some implementations of g_output_stream_writev() may have limitations on the aggregate buffer size, and will return %G_IO_ERROR_INVALID_ARGUMENT if these are exceeded. For example, when writing to a local file on UNIX platforms, the aggregate buffer size must not exceed %G_MAXSSIZE bytes.

If count is 0, returns 0 and does nothing. A value of count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.

On success, the number of bytes written to the stream is returned. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, or if there is not enough storage in the stream. All writes block until at least one byte is written or an error occurs; 0 is never returned (unless count is 0).

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an operation was partially finished when the operation was cancelled the partial result will be returned, without an error.

On error -1 is returned and error is set accordingly.

This function is similar to g_output_stream_write(), except it tries to write as many bytes as requested, only stopping on an error.

On a successful write of count bytes, %TRUE is returned, and bytes_written is set to count.

If there is an error during the operation %FALSE is returned and error is set to indicate the error status.

As a special exception to the normal conventions for functions that use #GError, if this function returns %FALSE (and sets error) then bytes_written will be set to the number of bytes that were successfully written before the error was encountered. This functionality is only available from C. If you need it from another language then you must write your own loop around g_output_stream_write().

This is the asynchronous version of g_output_stream_write_all().

Call g_output_stream_write_all_finish() to collect the result.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

Note that no copy of buffer will be made, so it must stay valid until callback is called.

As a special exception to the normal conventions for functions that use #GError, if this function returns %FALSE (and sets error) then bytes_written will be set to the number of bytes that were successfully written before the error was encountered. This functionality is only available from C. If you need it from another language then you must write your own loop around g_output_stream_write_async().

During an async request no other sync and async calls are allowed, and will result in %G_IO_ERROR_PENDING errors.

A value of count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.

On success, the number of bytes written will be passed to the callback. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, but generally we try to write as many bytes as requested.

You are guaranteed that this method will never fail with %G_IO_ERROR_WOULD_BLOCK - if stream can't accept more data, the method will just wait until this changes.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

For the synchronous, blocking version of this function, see g_output_stream_write().

Note that no copy of buffer will be made, so it must stay valid until callback is called. See g_output_stream_write_bytes_async() for a #GBytes version that will automatically hold a reference to the contents (without copying) for the duration of the call.

However, note that this function may still perform partial writes, just like g_output_stream_write(). If that occurs, to continue writing, you will need to create a new #GBytes containing just the remaining bytes, using g_bytes_new_from_bytes(). Passing the same #GBytes instance multiple times potentially can result in duplicated data in the output stream.

However, note that this function may still perform partial writes, just like g_output_stream_write_async(). If that occurs, to continue writing, you will need to create a new #GBytes containing just the remaining bytes, using g_bytes_new_from_bytes(). Passing the same #GBytes instance multiple times potentially can result in duplicated data in the output stream.

For the synchronous, blocking version of this function, see g_output_stream_write_bytes().

If n_vectors is 0 or the sum of all bytes in vectors is 0, returns 0 and does nothing.

On success, the number of bytes written to the stream is returned. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, or if there is not enough storage in the stream. All writes block until at least one byte is written or an error occurs; 0 is never returned (unless n_vectors is 0 or the sum of all bytes in vectors is 0).

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an operation was partially finished when the operation was cancelled the partial result will be returned, without an error.

Some implementations of g_output_stream_writev() may have limitations on the aggregate buffer size, and will return %G_IO_ERROR_INVALID_ARGUMENT if these are exceeded. For example, when writing to a local file on UNIX platforms, the aggregate buffer size must not exceed %G_MAXSSIZE bytes.

This function is similar to g_output_stream_writev(), except it tries to write as many bytes as requested, only stopping on an error.

On a successful write of all n_vectors vectors, %TRUE is returned, and bytes_written is set to the sum of all the sizes of vectors.

If there is an error during the operation %FALSE is returned and error is set to indicate the error status.

As a special exception to the normal conventions for functions that use #GError, if this function returns %FALSE (and sets error) then bytes_written will be set to the number of bytes that were successfully written before the error was encountered. This functionality is only available from C. If you need it from another language then you must write your own loop around g_output_stream_write().

The content of the individual elements of vectors might be changed by this function.

This is the asynchronous version of g_output_stream_writev_all().

Call g_output_stream_writev_all_finish() to collect the result.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

Note that no copy of vectors will be made, so it must stay valid until callback is called. The content of the individual elements of vectors might be changed by this function.

As a special exception to the normal conventions for functions that use #GError, if this function returns %FALSE (and sets error) then bytes_written will be set to the number of bytes that were successfully written before the error was encountered. This functionality is only available from C. If you need it from another language then you must write your own loop around g_output_stream_writev_async().

During an async request no other sync and async calls are allowed, and will result in %G_IO_ERROR_PENDING errors.

On success, the number of bytes written will be passed to the callback. It is not an error if this is not the same as the requested size, as it can happen e.g. on a partial I/O error, but generally we try to write as many bytes as requested.

You are guaranteed that this method will never fail with %G_IO_ERROR_WOULD_BLOCK — if stream can't accept more data, the method will just wait until this changes.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

For the synchronous, blocking version of this function, see g_output_stream_writev().

Note that no copy of vectors will be made, so it must stay valid until callback is called.