Class DesktopAppInfo

Whenever the source_property is changed the target_property is updated using the same value. For instance:

  g_object_bind_property (action, "active", widget, "sensitive", 0);

Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

A #GObject can have multiple bindings.

This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

On some platforms, there may be a difference between user-defined #GAppInfos which can be deleted, and system-wide ones which cannot. See g_app_info_can_delete().

Note that the check may not compare each individual field, and only does an identity check. In case detecting changes in the contents is needed, program code must additionally compare relevant fields.

This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

Note that the returned ID may be %NULL, depending on how the appinfo has been constructed.

The value can be:

• an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
• a #GValue initialized with the expected type of the property
• a #GValue initialized with a type to which the expected type of the property can be transformed

In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

To launch the application without arguments pass a %NULL files list.

Note that even if the launch is successful the application launched can fail to start if it runs into problems during startup. There is no way to detect this.

Some URIs can be changed when passed through a GFile (for instance unsupported URIs with strange formats like mailto:), so if you have a textual URI you want to pass in as argument, consider using g_app_info_launch_uris() instead.

The launched application inherits the environment of the launching process, but it can be modified with g_app_launch_context_setenv() and g_app_launch_context_unsetenv().

On UNIX, this function sets the GIO_LAUNCHED_DESKTOP_FILE environment variable with the path of the launched desktop file and GIO_LAUNCHED_DESKTOP_FILE_PID to the process id of the launched process. This can be used to ignore GIO_LAUNCHED_DESKTOP_FILE, should it be inherited by further processes. The DISPLAY and DESKTOP_STARTUP_ID environment variables are also set, based on information provided in context.

To launch the application without arguments pass a %NULL uris list.

Note that even if the launch is successful the application launched can fail to start if it runs into problems during startup. There is no way to detect this.

The callback is invoked immediately after the application launch, but it waits for activation in case of D-Bus–activated applications and also provides extended error information for sandboxed applications, see notes for g_app_info_launch_default_for_uri_async().

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

This function omits the property name lookup, hence it is faster than g_object_notify().

One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

  enum
  {
    PROP_0,
    PROP_FOO,
    PROP_LAST
  };

  static GParamSpec *properties[PROP_LAST];

  static void
  my_object_class_init (MyObjectClass *klass)
  {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
                                             0, 100,
                                             50,
                                             G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
                                     PROP_FOO,
                                     properties[PROP_FOO]);
  }

and then notify a change on the "foo" property with:

  g_object_notify_by_pspec (self, properties[PROP_FOO]);

Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

This function should only be called from object system implementations.

If the object already had an association with that name, the old association will be destroyed.

Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

void
object_add_to_user_list (GObject     *object,
                         const gchar *new_string)
{
  // the quark, naming the object data
  GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
  // retrieve the old string list
  GList *list = g_object_steal_qdata (object, quark_string_list);

  // prepend new string
  list = g_list_prepend (list, g_strdup (new_string));
  // this changed 'list', so we need to set it again
  g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
  GList *node, *list = data;

  for (node = list; node; node = node->next)
    g_free (node->data);
  g_list_free (list);
}

Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

It is an error to call this function when the freeze count is zero.

If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.

On some platforms, there may be a difference between user-defined #GAppInfos which can be deleted, and system-wide ones which cannot. See g_app_info_can_delete().

Note that the check may not compare each individual field, and only does an identity check. In case detecting changes in the contents is needed, program code must additionally compare relevant fields.

Note that the returned ID may be %NULL, depending on how the appinfo has been constructed.

To launch the application without arguments pass a %NULL files list.

Note that even if the launch is successful the application launched can fail to start if it runs into problems during startup. There is no way to detect this.

Some URIs can be changed when passed through a GFile (for instance unsupported URIs with strange formats like mailto:), so if you have a textual URI you want to pass in as argument, consider using g_app_info_launch_uris() instead.

The launched application inherits the environment of the launching process, but it can be modified with g_app_launch_context_setenv() and g_app_launch_context_unsetenv().

On UNIX, this function sets the GIO_LAUNCHED_DESKTOP_FILE environment variable with the path of the launched desktop file and GIO_LAUNCHED_DESKTOP_FILE_PID to the process id of the launched process. This can be used to ignore GIO_LAUNCHED_DESKTOP_FILE, should it be inherited by further processes. The DISPLAY and DESKTOP_STARTUP_ID environment variables are also set, based on information provided in context.

To launch the application without arguments pass a %NULL uris list.

Note that even if the launch is successful the application launched can fail to start if it runs into problems during startup. There is no way to detect this.

The callback is invoked immediately after the application launch, but it waits for activation in case of D-Bus–activated applications and also provides extended error information for sandboxed applications, see notes for g_app_info_launch_default_for_uri_async().

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.