Class VideoAggregatorPad

If you don't know what this is, you probably don't want to call it.

The object's reference count will be incremented, and any floating reference will be removed (see gst_object_ref_sink())

Probes are called in groups: First GST_PAD_PROBE_TYPE_BLOCK probes are called, then others, then finally GST_PAD_PROBE_TYPE_IDLE. The only exception here are GST_PAD_PROBE_TYPE_IDLE probes that are called immediately if the pad is already idle while calling gst_pad_add_probe(). In each of the groups, probes are called in the order in which they were added.

Whenever the source_property is changed the target_property is updated using the same value. For instance:

  g_object_bind_property (action, "active", widget, "sensitive", 0);

Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

A #GObject can have multiple bindings.

This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

The function returns #GST_FLOW_FLUSHING if the pad was flushing.

If the buffer type is not acceptable for pad (as negotiated with a preceding GST_EVENT_CAPS event), this function returns #GST_FLOW_NOT_NEGOTIATED.

The function proceeds calling the chain function installed on pad (see gst_pad_set_chain_function()) and the return value of that function is returned to the caller. #GST_FLOW_NOT_SUPPORTED is returned if pad has no chain function.

In all cases, success or failure, the caller loses its reference to buffer after calling this function.

The function returns #GST_FLOW_FLUSHING if the pad was flushing.

If pad was not negotiated properly with a CAPS event, this function returns #GST_FLOW_NOT_NEGOTIATED.

The function proceeds calling the chainlist function installed on pad (see gst_pad_set_chain_list_function()) and the return value of that function is returned to the caller. #GST_FLOW_NOT_SUPPORTED is returned if pad has no chainlist function.

In all cases, success or failure, the caller loses its reference to list after calling this function.

MT safe.

This function generates an unique stream-id by getting the upstream stream-start event stream ID and appending stream_id to it. If the element has no sinkpad it will generate an upstream stream-id by doing an URI query on the element and in the worst case just uses a random number. Source elements that don't implement the URI handler interface should ideally generate a unique, deterministic stream-id manually instead.

Since stream IDs are sorted alphabetically, any numbers in the stream ID should be printed with a fixed number of characters, preceded by 0's, such as by using the format %03u instead of %u.

The default handler will simply print the error string using g_print.

The EOS event will pause the task associated with pad before it is forwarded to all internally linked pads,

The event is sent to all pads internally linked to pad. This function takes ownership of event.

When forward returns %TRUE, no further pads will be processed.

This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

The allowed capabilities is calculated as the intersection of the results of calling gst_pad_query_caps() on pad and its peer. The caller owns a reference on the resulting caps.

If the object is not under property control, this will return %GST_CLOCK_TIME_NONE. This allows the element to avoid the sub-dividing.

The control-rate is not expected to change if the element is in %GST_STATE_PAUSED or %GST_STATE_PLAYING.

This function is useful if one wants to e.g. draw a graph of the control curve or apply a control curve sample by sample.

Free-function: g_free

Free-function: g_free

The value can be:

• an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
• a #GValue initialized with the expected type of the property
• a #GValue initialized with a type to which the expected type of the property can be transformed

In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

Calls the getrange function of pad, see #GstPadGetRangeFunction for a description of a getrange function. If pad has no getrange function installed (see gst_pad_set_getrange_function()) this function returns #GST_FLOW_NOT_SUPPORTED.

If buffer points to a variable holding %NULL, a valid new #GstBuffer will be placed in buffer when this function returns #GST_FLOW_OK. The new buffer must be freed with gst_buffer_unref() after usage.

When buffer points to a variable that points to a valid #GstBuffer, the buffer will be filled with the result data when this function returns #GST_FLOW_OK. If the provided buffer is larger than size, only size bytes will be filled in the result buffer and its size will be updated accordingly.

Note that less than size bytes can be returned in buffer when, for example, an EOS condition is near or when buffer is not large enough to hold size bytes. The caller should check the result buffer size to get the result size.

When this function returns any other result value than #GST_FLOW_OK, buffer will be unchanged.

This is a lowlevel function. Usually gst_pad_pull_range() is used.

This is a convenience wrapper around gst_pad_get_sticky_event() and gst_event_parse_stream().

This is a convenience wrapper around gst_pad_get_sticky_event() and gst_event_parse_stream_start().

The returned stream-id string should be treated as an opaque string, its contents should not be interpreted.

Each #GstPad element yielded by the iterator will have its refcount increased, so unref after use.

Free-function: gst_iterator_free

The caller must free this iterator after use with gst_iterator_free().

This variant of #gst_pad_link provides a more granular control on the checks being done when linking. While providing some considerable speedups the caller of this method must be aware that wrong usage of those flags can cause severe issues. Refer to the documentation of #GstPadLinkCheck for more information.

MT Safe.

This is a convenience function to save having to create and add intermediate #GstGhostPad's as required for linking across #GstBin boundaries.

If src or sink pads don't have parent elements or do not share a common ancestor, the link will fail.

This is a convenience function to save having to create and add intermediate #GstGhostPad's as required for linking across #GstBin boundaries.

If src or sink pads don't have parent elements or do not share a common ancestor, the link will fail.

Calling gst_pad_link_maybe_ghosting_full() with flags == %GST_PAD_LINK_CHECK_DEFAULT is the recommended way of linking pads with safety checks applied.

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

This function omits the property name lookup, hence it is faster than g_object_notify().

One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

  enum
  {
    PROP_0,
    PROP_FOO,
    PROP_LAST
  };

  static GParamSpec *properties[PROP_LAST];

  static void
  my_object_class_init (MyObjectClass *klass)
  {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
                                             0, 100,
                                             50,
                                             G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
                                     PROP_FOO,
                                     properties[PROP_FOO]);
  }

and then notify a change on the "foo" property with:

  g_object_notify_by_pspec (self, properties[PROP_FOO]);

The caller is responsible for both the allocation and deallocation of the query structure.

When called on srcpads filter contains the caps that upstream could produce in the order preferred by upstream. When called on sinkpads filter contains the caps accepted by downstream in the preferred order. filter might be %NULL but if it is not %NULL the returned caps will be a subset of filter.

This function is useful as a default accept caps query function for an element that can handle any stream format, but requires caps that are acceptable for all opposite pads.

This function is useful as a default caps query function for an element that can handle any stream format, but requires all its pads to have the same caps. Two such elements are tee and adder.

This function will first trigger the pad block signal if it was installed.

When pad is not linked #GST_FLOW_NOT_LINKED is returned else this function returns the result of gst_pad_get_range() on the peer pad. See gst_pad_get_range() for a list of return values and for the semantics of the arguments of this function.

If buffer points to a variable holding %NULL, a valid new #GstBuffer will be placed in buffer when this function returns #GST_FLOW_OK. The new buffer must be freed with gst_buffer_unref() after usage. When this function returns any other result value, buffer will still point to %NULL.

When buffer points to a variable that points to a valid #GstBuffer, the buffer will be filled with the result data when this function returns #GST_FLOW_OK. When this function returns any other result value, buffer will be unchanged. If the provided buffer is larger than size, only size bytes will be filled in the result buffer and its size will be updated accordingly.

Note that less than size bytes can be returned in buffer when, for example, an EOS condition is near or when buffer is not large enough to hold size bytes. The caller should check the result buffer size to get the result size.

This function will call installed block probes before triggering any installed data probes.

The function proceeds calling gst_pad_chain() on the peer pad and returns the value from that function. If pad has no peer, #GST_FLOW_NOT_LINKED will be returned.

In all cases, success or failure, the caller loses its reference to buffer after calling this function.

This function takes ownership of the provided event so you should gst_event_ref() it if you want to reuse the event after this call.

This function will call installed block probes before triggering any installed data probes.

The function proceeds calling the chain function on the peer pad and returns the value from that function. If pad has no peer, #GST_FLOW_NOT_LINKED will be returned. If the peer pad does not have any installed chainlist function every group buffer of the list will be merged into a normal #GstBuffer and chained via gst_pad_chain().

In all cases, success or failure, the caller loses its reference to list after calling this function.

Again, the caller is responsible for both the allocation and deallocation of the query structure.

Please also note that some queries might need a running pipeline to work.

When called on sinkpads filter contains the caps that upstream could produce in the order preferred by upstream. When called on srcpads filter contains the caps accepted by downstream in the preferred order. filter might be %NULL but if it is not %NULL the returned caps will be a subset of filter.

Note that this function does not return writable #GstCaps, use gst_caps_make_writable() before modifying the caps.

This object returns the input parameter to ease writing constructs like : result = gst_object_ref (object->parent);

In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

MT safe.

This function should only be called from object system implementations.

If pad is a source pad, event should be an upstream event. If pad is a sink pad, event should be a downstream event. For example, you would not send a #GST_EVENT_EOS on a src pad; EOS events only propagate downstream. Furthermore, some downstream events have to be serialized with data flow, like EOS, while some can travel out-of-band, like #GST_EVENT_FLUSH_START. If the event needs to be serialized with data flow, this function will take the pad's stream lock while calling its event function.

To find out whether an event type is upstream, downstream, or downstream and serialized, see #GstEventTypeFlags, gst_event_type_get_flags(), #GST_EVENT_IS_UPSTREAM, #GST_EVENT_IS_DOWNSTREAM, and #GST_EVENT_IS_SERIALIZED. Note that in practice that an application or plugin doesn't need to bother itself with this information; the core handles all necessary locks and checks.

This function takes ownership of the provided event so you should gst_event_ref() it if you want to reuse the event after this call.

Call this function if your sink pad can start a pull-based task.

If active, makes sure the pad is active. If it is already active, either in push or pull mode, just return. Otherwise dispatches to the pad's activate function to perform the actual activation.

If not active, calls gst_pad_activate_mode() with the pad's current mode and a %FALSE argument.

The control-rate should not change if the element is in %GST_STATE_PAUSED or %GST_STATE_PLAYING.

If the object already had an association with that name, the old association will be destroyed.

Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

The return value #GST_PAD_LINK_OK should be used when the connection can be made.

The return value #GST_PAD_LINK_REFUSED should be used when the connection cannot be made for some reason.

If link is installed on a source pad, it should call the #GstPadLinkFunction of the peer sink pad, if present.

Note that the pad's lock is already held when the unlink function is called, so most pad functions cannot be called from within the callback.

void
object_add_to_user_list (GObject     *object,
                         const gchar *new_string)
{
  // the quark, naming the object data
  GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
  // retrieve the old string list
  GList *list = g_object_steal_qdata (object, quark_string_list);

  // prepend new string
  list = g_list_prepend (list, g_strdup (new_string));
  // this changed 'list', so we need to set it again
  g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
  GList *node, *list = data;

  for (node = list; node; node = node->next)
    g_free (node->data);
  g_list_free (list);
}

Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

This function will deadlock if called from the GstTaskFunction of the task. Use gst_task_pause() instead.

Regardless of whether the pad has a task, the stream lock is acquired and released so as to ensure that streaming through this pad has finished.

If this function fails, it is most likely the application developers fault. Most probably the control sources are not setup correctly.

Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

It is an error to call this function when the freeze count is zero.

MT safe. Grabs and releases object's lock.

The unref method should never be called with the LOCK held since this might deadlock the dispose function.

The negotiated caps are the caps of the last CAPS event that passed on the pad. Use this function on a pad that, once it negotiated to a CAPS, cannot be renegotiated to something else.