Creates a new #GstBufferPool instance.
flags for this object
whether the pool is currently gathering back outstanding buffers
The name of the object
the parent structure
this object's parent, weak ref
Acquires a buffer from pool. buffer should point to a memory location that
can hold a pointer to the new buffer.
params can contain optional parameters to influence the allocation.
parameters.
Attach the #GstControlBinding to the object. If there already was a #GstControlBinding for this property it will be replaced.
The object's reference count will be incremented, and any floating reference will be removed (see gst_object_ref_sink())
the #GstControlBinding that should be used
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Gets the corresponding #GstControlBinding for the property. This should be unreferenced again after use.
name of the property
Obtain the control-rate for this object. Audio processing #GstElement
objects will use this rate to sub-divide their processing loop and call
gst_object_sync_values() in between. The length of the processing segment
should be up to control-rate nanoseconds.
If the object is not under property control, this will return
%GST_CLOCK_TIME_NONE. This allows the element to avoid the sub-dividing.
The control-rate is not expected to change if the element is in %GST_STATE_PAUSED or %GST_STATE_PLAYING.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Gets a number of #GValues for the given controlled property starting at the
requested time. The array values need to hold enough space for n_values of
#GValue.
This function is useful if one wants to e.g. draw a graph of the control curve or apply a control curve sample by sample.
the name of the property to get
the time that should be processed
the time spacing between subsequent values
array to put control-values in
Returns a copy of the name of object.
Caller should g_free() the return value after usage.
For a nameless object, this returns %NULL, which you can safely g_free()
as well.
Free-function: g_free
Gets a %NULL terminated array of string with supported bufferpool options for
pool. An option would typically be enabled with
gst_buffer_pool_config_add_option().
Generates a string describing the path of object in
the object hierarchy. Only useful (or used) for debugging.
Free-function: g_free
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Gets the value for the given controlled property at the requested time.
the name of the property to get
the time the control-change should be read from
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Check if the object has active controlled properties.
Checks if the bufferpool supports option.
an option
Checks if pool is active. A pool can be activated with the
gst_buffer_pool_set_active() call.
Checks whether object has a [floating][floating-ref] reference.
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Increments the reference count on object. This function
does not take the lock on object because it relies on
atomic refcounting.
This object returns the input parameter to ease writing constructs like : result = gst_object_ref (object->parent);
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Removes the corresponding #GstControlBinding. If it was the last ref of the binding, it will be disposed.
the binding
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Controls the active state of pool. When the pool is inactive, new calls to
gst_buffer_pool_acquire_buffer() will return with %GST_FLOW_FLUSHING.
Activating the bufferpool will preallocate all resources in the pool based on the configuration of the pool.
Deactivating will free the resources again when there are no outstanding buffers. When there are outstanding buffers, they will be freed as soon as they are all returned to the pool.
the new active state
Sets the configuration of the pool. If the pool is already configured, and the configuration hasn't changed, this function will return %TRUE. If the pool is active, this method will return %FALSE and active configuration will remain. Buffers allocated from this pool must be returned or else this function will do nothing and return %FALSE.
config is a #GstStructure that contains the configuration parameters for
the pool. A default and mandatory set of parameters can be configured with
gst_buffer_pool_config_set_params(), gst_buffer_pool_config_set_allocator()
and gst_buffer_pool_config_add_option().
If the parameters in config can not be set exactly, this function returns
%FALSE and will try to update as much state as possible. The new state can
then be retrieved and refined with gst_buffer_pool_get_config().
This function takes ownership of config.
This function is used to disable the control bindings on a property for some time, i.e. gst_object_sync_values() will do nothing for the property.
property to disable
boolean that specifies whether to disable the controller or not.
This function is used to disable all controlled properties of the object for
some time, i.e. gst_object_sync_values() will do nothing.
boolean that specifies whether to disable the controller or not.
Change the control-rate for this object. Audio processing #GstElement
objects will use this rate to sub-divide their processing loop and call
gst_object_sync_values() in between. The length of the processing segment
should be up to control-rate nanoseconds.
The control-rate should not change if the element is in %GST_STATE_PAUSED or %GST_STATE_PLAYING.
the new control-rate in nanoseconds.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Enables or disables the flushing state of a pool without freeing or
allocating buffers.
whether to start or stop flushing
Sets the name of object, or gives object a guaranteed unique
name (if name is %NULL).
This function makes a copy of the provided name, so the caller
retains ownership of the name it sent.
new name of object
Sets a property on an object.
the name of the property to set
the value
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Returns a suggestion for timestamps where buffers should be split to get best controller results.
Sets the properties of the object, according to the #GstControlSources that (maybe) handle them and for the given timestamp.
If this function fails, it is most likely the application developers fault. Most probably the control sources are not setup correctly.
the time that should be processed
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Clear the parent of object, removing the associated reference.
This function decreases the refcount of object.
MT safe. Grabs and releases object's lock.
Decrements the reference count on object. If reference count hits
zero, destroy object. This function does not take the lock
on object as it relies on atomic refcounting.
The unref method should never be called with the LOCK held since this might deadlock the dispose function.
Acquires a buffer from pool. buffer should point to a memory location that
can hold a pointer to the new buffer.
params can contain optional parameters to influence the allocation.
parameters.
Allocate a buffer. the default implementation allocates buffers from the configured memory allocator and with the configured parameters. All metadata that is present on the allocated buffer will be marked as #GST_META_FLAG_POOLED and #GST_META_FLAG_LOCKED and will not be removed from the buffer in #GstBufferPoolClass::reset_buffer. The buffer should have the #GST_BUFFER_FLAG_TAG_MEMORY cleared.
parameters.
Enter the flushing state.
Leave the flushing state.
Gets a %NULL terminated array of string with supported bufferpool options for
pool. An option would typically be enabled with
gst_buffer_pool_config_add_option().
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
Reset the buffer to its state when it was freshly allocated. The default implementation will clear the flags, timestamps and will remove the metadata without the #GST_META_FLAG_POOLED flag (even the metadata with #GST_META_FLAG_LOCKED). If the #GST_BUFFER_FLAG_TAG_MEMORY was set, this function can also try to restore the memory and clear the #GST_BUFFER_FLAG_TAG_MEMORY again.
Sets the configuration of the pool. If the pool is already configured, and the configuration hasn't changed, this function will return %TRUE. If the pool is active, this method will return %FALSE and active configuration will remain. Buffers allocated from this pool must be returned or else this function will do nothing and return %FALSE.
config is a #GstStructure that contains the configuration parameters for
the pool. A default and mandatory set of parameters can be configured with
gst_buffer_pool_config_set_params(), gst_buffer_pool_config_set_allocator()
and gst_buffer_pool_config_add_option().
If the parameters in config can not be set exactly, this function returns
%FALSE and will try to update as much state as possible. The new state can
then be retrieved and refined with gst_buffer_pool_get_config().
This function takes ownership of config.
Start the bufferpool. The default implementation will preallocate min-buffers buffers and put them in the queue.
Stop the bufferpool. the default implementation will free the preallocated buffers. This function is called when all the buffers are returned to the pool.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Checks to see if there is any object named name in list. This function
does not do any locking of any kind. You might want to protect the
provided list with the lock of the owner of the list. This function
will lock each #GstObject in the list to compare the name, so be
careful when passing a list with a locked object.
Enables the option in config. This will instruct the bufferpool to enable
the specified option on the buffers that it allocates.
The options supported by pool can be retrieved with gst_buffer_pool_get_options().
Gets the allocator and params from config.
Sets the allocator and params on config.
One of allocator and params can be %NULL, but not both. When allocator
is %NULL, the default allocator of the pool will use the values in param
to perform its allocation. When param is %NULL, the pool will use the
provided allocator with its default #GstAllocationParams.
A call to gst_buffer_pool_set_config() can update the allocator and params
with the values that it is able to do. Some pools are, for example, not able
to operate with different allocators or cannot allocate with the values
specified in params. Use gst_buffer_pool_get_config() to get the currently
used values.
a #GstBufferPool configuration
a #GstAllocator
#GstAllocationParams
Configures config with the given parameters.
a #GstBufferPool configuration
caps for the buffers
the size of each buffer, not including prefix and padding
the minimum amount of buffers to allocate.
the maximum amount of buffers to allocate or 0 for unlimited.
Validates that changes made to config are still valid in the context of the
expected parameters. This function is a helper that can be used to validate
changes made by a pool to a config when gst_buffer_pool_set_config()
returns %FALSE. This expects that caps haven't changed and that
min_buffers aren't lower then what we initially expected.
This does not check if options or allocator parameters are still valid,
won't check if size have changed, since changing the size is valid to adapt
padding.
a #GstBufferPool configuration
the excepted caps of buffers
the expected size of each buffer, not including prefix and padding
the expected minimum amount of buffers to allocate.
the expect maximum amount of buffers to allocate or 0 for unlimited.
A default deep_notify signal callback for an object. The user data should contain a pointer to an array of strings that should be excluded from the notify. The default handler will print the new value of the property using g_print.
MT safe. This function grabs and releases object's LOCK for getting its
path string.
the #GObject that signalled the notify.
a #GstObject that initiated the notify.
a #GParamSpec of the property.
a set of user-specified properties to exclude or %NULL to show all changes.
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Creates a new #GstBufferPool instance.
Creates a new #GstBufferPool instance.
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
Atomically modifies a pointer to point to a new object.
The reference count of oldobj is decreased and the reference count of
newobj is increased.
Either newobj and the value pointed to by oldobj may be %NULL.
pointer to a place of a #GstObject to replace
a new #GstObject
Opaque GstVulkanBufferPool struct