a unique identifier
The username to be passed to the cloud-init program.
The codename of this product.
The generic distro this OS belongs to, for example fedora, windows, solaris, freebsd etc.
The generic family this OS belongs to, based upon its kernel, for example linux, winnt, solaris, freebsd etc.
The unique identifier for the entity The format of identifiers is undefined, but the recommended practice is to use a URI. This parameter must be set at time of construction as no default value is provided.
The argument to be passed to kernel command line when performing a tree based installation of this OS.
The URI of the logo of the product.
The name of this product.
The short ID of this product.
The Vendor of this product.
The version of the product.
Associated a device with an operating system. The returned #OsinfoDeviceLink can be used to record extra metadata against the link
Adds driver to the list of device drivers of operating system os.
the device driver to add
Adds firmware to the list of firmwares of operating system os.
the firmware to add
Adds script to the list of scripts of operating system os.
the install script to add
Adds resources to list of maximum resources of operating system os.
the resources to add
Adds resources to list of minimum resources of operating system os.
the resources to add
Adds resources to list of resources needed for network installing an
operating system os.
the resources to add
Adds a new parameter against the entity. A key can have multiple values associated. Thus repeated calls with the same key will build up a list of possible values.
the name of the key
the data to associated with that key
Adds resources to list of recommended resources of operating system os.
the resources to add
Add an association between two products
the relationship
the product to relate to
Adds a variant variant to operating system os.
the variant to add
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
Remove all values associated with a key
the name of the key
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Get all devicelinks matching a given filter but unlike osinfo_os_get_device_links this function also retrieves devices from all derived and cloned operating systems.
Get all devices matching a given filter but unlike osinfo_os_get_devices this function also retrieves devices from all derived and cloned operating systems.
Gets the username expected to be passed to the cloud image when performing installation.
Get the complete firmwares matching a given filter, including the non-supported ones.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Gets list of all available device drivers for OS os.
Gets list of the highest priority device drivers for OS os.
Get all devices matching a given filter. The filter matches against the links, not the devices.
Get all devices matching a given filter
A utility function that gets devices found from the list of devices
os supports, for which the value of property is value.
the property of interest
the required value of property property
Should devices from inherited and cloned OSs be included in the search.
Retrieves the generic family the OS os belongs to, for example fedora,
ubuntu, windows, solaris, freebsd etc.
Retrieves the generic family the OS os belongs to, based upon its kernel,
for example linux, winnt, solaris, freebsd etc.
Get all the supported firmwares matching a given filter
Retrieves the unique key for the entity. The format of identifiers is undefined, but the recommended practice is to use a URI.
Get all installed images associated with operating system os.
Gets the argument expected to be passed to the kernel command line when performing a tree based installation.
Get the list of maximum resources for the operating system os.
Get all installation medias associated with operating system os.
Get the list of minimum required resources for the operating system os.
Get the list of resources needed for network installing an operating system
os.
Retrieve all the known parameter keys associated with the entity
Retrieve the parameter value associated with a named key. If multiple values are stored against the key, only the first value is returned. If no value is associated, NULL is returned
the name of the key
Retrieve the parameter value associated with a named key as a boolean. If multiple values are stored against the key, only the first value is returned. If no value is associated, FALSE is returned
the name of the key
Retrieve the parameter value associated with a named key as a
boolean. If multiple values are stored against the key, only the
first value is returned. If no value is associated, default_value
is returned.
the name of the key
the value to be returned in case there's no value associated with the key
Retrieve the parameter value associated with a named key as an
enum value. If multiple values are stored against the key, only
the first value is returned. If no value is associated, the
default_value is returned.
the name of the key
the enum type
the default value to be used, in case there's no value associated with the key
Retrieve the parameter value associated with a named key as an int64. If multiple values are stored against the key, only the first value is returned. If no value is associated, -1 is returned.
the name of the key
Retrieve the parameter value associated with a named key as an
int64. If multiple values are stored against the key, only the
first value is returned. If no value is associated, default_value
is returned.
the name of the key
the value to be returned in case there's no value associated with the key
Retrieve all the parameter values associated with a named key. If no values are associated, NULL is returned
the name of the key
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Get the list of recommended resources for the operating system os.
Get a list of products satisfying the requested relationship
the relationship to query
Use this to determine the release status of the os.
Retrieve all the short-ids associated with the product.
Get all installation trees associated with operating system os.
Gets all known variants of operating system os.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Checks whether object has a [floating][floating-ref] reference.
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Sets a new parameter against the entity. If the key already has a value associated with it, the existing value will be cleared.
the name of the key
the data to associated with that key
Sets a new parameter against the entity. If the key already has a value associated with it, the existing value will be cleared.
the name of the key
the boolean value to be associated with that key
Sets a new parameter against the entity. If the key already has a value associated with it, the existing value will be cleared.
the name of the key
the enum value to be associated with that key
the enum type
Sets a new parameter against the entity. If the key already has a value associated with it, the existing value will be cleared.
the name of the key
the int64 value to be associated with that key
Sets a property on an object.
the name of the property to set
the value
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Create a new operating system entity
a unique identifier
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
Create a new operating system entity