Asynchronously sends a Activate Automatic request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_activate_automatic_finish() to get the result of the operation.
a #QmiMessageDmsActivateAutomaticInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_activate_automatic().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_activate_automatic().
Asynchronously sends a Activate Manual request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_activate_manual_finish() to get the result of the operation.
a #QmiMessageDmsActivateManualInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_activate_manual().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_activate_manual().
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
Checks if the version of the service handled by this #QmiClient is greater or equal than the given version.
a major version.
a minor version.
Asynchronously sends a Delete Stored Image request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_delete_stored_image_finish() to get the result of the operation.
a #QmiMessageDmsDeleteStoredImageInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_delete_stored_image().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_delete_stored_image().
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Asynchronously sends a Foxconn Change Device Mode request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_foxconn_change_device_mode_finish() to get the result of the operation.
a #QmiMessageDmsFoxconnChangeDeviceModeInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_foxconn_change_device_mode().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_foxconn_change_device_mode().
Asynchronously sends a Foxconn Get Firmware Version request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_foxconn_get_firmware_version_finish() to get the result of the operation.
a #QmiMessageDmsFoxconnGetFirmwareVersionInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_foxconn_get_firmware_version().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_foxconn_get_firmware_version().
Asynchronously sends a Foxconn Set FCC Authentication request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_foxconn_set_fcc_authentication_finish() to get the result of the operation.
a #QmiMessageDmsFoxconnSetFccAuthenticationInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_foxconn_set_fcc_authentication().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_foxconn_set_fcc_authentication().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Asynchronously sends a Get Activation State request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_activation_state_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_activation_state().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_activation_state().
Asynchronously sends a Get Alt Net Config request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_alt_net_config_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_alt_net_config().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_alt_net_config().
Asynchronously sends a Get Band Capabilities request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_band_capabilities_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_band_capabilities().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_band_capabilities().
Asynchronously sends a Get Boot Image Download Mode request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_boot_image_download_mode_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_boot_image_download_mode().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_boot_image_download_mode().
Asynchronously sends a Get Capabilities request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_capabilities_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_capabilities().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_capabilities().
Get the client ID of this #QmiClient.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Asynchronously sends a Get Factory SKU request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_factory_sku_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_factory_sku().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_factory_sku().
Asynchronously sends a Get Firmware Preference request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_firmware_preference_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_firmware_preference().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_firmware_preference().
Asynchronously sends a Get Hardware Revision request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_hardware_revision_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_hardware_revision().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_hardware_revision().
Asynchronously sends a Get IDs request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_ids_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_ids().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_ids().
Asynchronously sends a Get MAC Address request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_mac_address_finish() to get the result of the operation.
a #QmiMessageDmsGetMacAddressInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_mac_address().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_mac_address().
Asynchronously sends a Get Manufacturer request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_manufacturer_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_manufacturer().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_manufacturer().
Asynchronously sends a Get Model request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_model_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_model().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_model().
Asynchronously sends a Get MSISDN request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_msisdn_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_msisdn().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_msisdn().
Acquire the next transaction ID of this #QmiClient. The internal transaction ID gets incremented.
Asynchronously sends a Get Operating Mode request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_operating_mode_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_operating_mode().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_operating_mode().
Asynchronously sends a Get Power State request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_power_state_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_power_state().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_power_state().
Asynchronously sends a Get PRL Version request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_prl_version_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_prl_version().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_prl_version().
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Asynchronously sends a Get Revision request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_revision_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_revision().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_revision().
Asynchronously sends a Get Software Version request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_software_version_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_software_version().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_software_version().
Asynchronously sends a Get Stored Image Info request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_stored_image_info_finish() to get the result of the operation.
a #QmiMessageDmsGetStoredImageInfoInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_stored_image_info().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_stored_image_info().
Asynchronously sends a Get Supported Messages request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_supported_messages_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_supported_messages().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_supported_messages().
Asynchronously sends a Get Time request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_time_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_time().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_time().
Asynchronously sends a Get User Lock State request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_get_user_lock_state_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_get_user_lock_state().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_get_user_lock_state().
Get the version of the service handled by this #QmiClient.
placeholder for the output major version.
placeholder for the output minor version.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Asynchronously sends a HP Change Device Mode request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_hp_change_device_mode_finish() to get the result of the operation.
a #QmiMessageDmsHpChangeDeviceModeInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_hp_change_device_mode().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_hp_change_device_mode().
Checks whether object has a [floating][floating-ref] reference.
Checks whether #QmiClient is a valid and usable client.
The client is marked as invalid as soon as the client id is released or when the associated #QmiDevice is closed.
This method may be used if the caller needs to ensure validity before a command is attempted, e.g. if the lifecycle of the object is managed in some other place and the caller just has a reference to the #QmiClient.
Asynchronously sends a List Stored Images request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_list_stored_images_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_list_stored_images().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_list_stored_images().
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Asynchronously sends a Read ERI File request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_read_eri_file_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_read_eri_file().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_read_eri_file().
Asynchronously sends a Read User Data request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_read_user_data_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_read_user_data().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_read_user_data().
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Asynchronously sends a Reset request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_reset_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_reset().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_reset().
Asynchronously sends a Restore Factory Defaults request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_restore_factory_defaults_finish() to get the result of the operation.
a #QmiMessageDmsRestoreFactoryDefaultsInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_restore_factory_defaults().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_restore_factory_defaults().
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Asynchronously sends a Set Alt Net Config request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_alt_net_config_finish() to get the result of the operation.
a #QmiMessageDmsSetAltNetConfigInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_alt_net_config().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_alt_net_config().
Asynchronously sends a Set Boot Image Download Mode request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_boot_image_download_mode_finish() to get the result of the operation.
a #QmiMessageDmsSetBootImageDownloadModeInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_boot_image_download_mode().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_boot_image_download_mode().
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Asynchronously sends a Set Event Report request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_event_report_finish() to get the result of the operation.
a #QmiMessageDmsSetEventReportInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_event_report().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_event_report().
Asynchronously sends a Set FCC Authentication request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_fcc_authentication_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_fcc_authentication().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_fcc_authentication().
Asynchronously sends a Set Firmware ID request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_firmware_id_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_firmware_id().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_firmware_id().
Asynchronously sends a Set Firmware Preference request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_firmware_preference_finish() to get the result of the operation.
a #QmiMessageDmsSetFirmwarePreferenceInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_firmware_preference().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_firmware_preference().
Asynchronously sends a Set Operating Mode request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_operating_mode_finish() to get the result of the operation.
a #QmiMessageDmsSetOperatingModeInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_operating_mode().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_operating_mode().
Sets a property on an object.
the name of the property to set
the value
Asynchronously sends a Set Service Programming Code request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_service_programming_code_finish() to get the result of the operation.
a #QmiMessageDmsSetServiceProgrammingCodeInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_service_programming_code().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_service_programming_code().
Asynchronously sends a Set Time request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_time_finish() to get the result of the operation.
a #QmiMessageDmsSetTimeInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_time().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_time().
Asynchronously sends a Set User Lock Code request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_user_lock_code_finish() to get the result of the operation.
a #QmiMessageDmsSetUserLockCodeInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_user_lock_code().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_user_lock_code().
Asynchronously sends a Set User Lock State request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_set_user_lock_state_finish() to get the result of the operation.
a #QmiMessageDmsSetUserLockStateInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_set_user_lock_state().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_set_user_lock_state().
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Asynchronously sends a Swi Get Current Firmware request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_swi_get_current_firmware_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_swi_get_current_firmware().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_swi_get_current_firmware().
Asynchronously sends a Swi Get USB Composition request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_swi_get_usb_composition_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_swi_get_usb_composition().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_swi_get_usb_composition().
Asynchronously sends a Swi Set USB Composition request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_swi_set_usb_composition_finish() to get the result of the operation.
a #QmiMessageDmsSwiSetUsbCompositionInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_swi_set_usb_composition().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_swi_set_usb_composition().
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Asynchronously sends a UIM Change PIN request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_change_pin_finish() to get the result of the operation.
a #QmiMessageDmsUimChangePinInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_change_pin().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_change_pin().
Asynchronously sends a UIM Get CK Status request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_get_ck_status_finish() to get the result of the operation.
a #QmiMessageDmsUimGetCkStatusInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_get_ck_status().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_get_ck_status().
Asynchronously sends a UIM Get ICCID request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_get_iccid_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_get_iccid().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_get_iccid().
Asynchronously sends a UIM Get IMSI request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_get_imsi_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_get_imsi().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_get_imsi().
Asynchronously sends a UIM Get PIN Status request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_get_pin_status_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_get_pin_status().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_get_pin_status().
Asynchronously sends a UIM Get State request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_get_state_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_get_state().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_get_state().
Asynchronously sends a UIM Set CK Protection request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_set_ck_protection_finish() to get the result of the operation.
a #QmiMessageDmsUimSetCkProtectionInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_set_ck_protection().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_set_ck_protection().
Asynchronously sends a UIM Set PIN Protection request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_set_pin_protection_finish() to get the result of the operation.
a #QmiMessageDmsUimSetPinProtectionInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_set_pin_protection().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_set_pin_protection().
Asynchronously sends a UIM Unblock CK request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_unblock_ck_finish() to get the result of the operation.
a #QmiMessageDmsUimUnblockCkInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_unblock_ck().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_unblock_ck().
Asynchronously sends a UIM Unblock PIN request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_unblock_pin_finish() to get the result of the operation.
a #QmiMessageDmsUimUnblockPinInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_unblock_pin().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_unblock_pin().
Asynchronously sends a UIM Verify PIN request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_uim_verify_pin_finish() to get the result of the operation.
a #QmiMessageDmsUimVerifyPinInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_uim_verify_pin().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_uim_verify_pin().
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
Asynchronously sends a Validate Service Programming Code request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_validate_service_programming_code_finish() to get the result of the operation.
a #QmiMessageDmsValidateServiceProgrammingCodeInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_validate_service_programming_code().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_validate_service_programming_code().
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Asynchronously sends a Write User Data request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_dms_write_user_data_finish() to get the result of the operation.
a #QmiMessageDmsWriteUserDataInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_dms_write_user_data().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_dms_write_user_data().
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
The #QmiClientDms structure contains private data and should only be accessed using the provided API.