Class VulkanContext

Calling this function begins a drawing operation using context on the surface that context was created from. The actual requirements and guarantees for the drawing operation vary for different implementations of drawing, so a [classGdk.CairoContext] and a [classGdk.GLContext] need to be treated differently.

A call to this function is a requirement for drawing and must be followed by a call to [methodGdk.DrawContext.end_frame], which will complete the drawing operation and ensure the contents become visible on screen.

Note that the region passed to this function is the minimum region that needs to be drawn and depending on implementation, windowing system and hardware in use, it might be necessary to draw a larger region. Drawing implementation must use [methodGdk.DrawContext.get_frame_region] to query the region that must be drawn.

When using GTK, the widget system automatically places calls to gdk_draw_context_begin_frame() and gdk_draw_context_end_frame() via the use of [classGsk.Renderer]s, so application code does not need to call these functions explicitly.

Whenever the source_property is changed the target_property is updated using the same value. For instance:

  g_object_bind_property (action, "active", widget, "sensitive", 0);

Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

A #GObject can have multiple bindings.

This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

This makes the drawing available on screen. See [methodGdk.DrawContext.begin_frame] for more details about drawing.

When using a [classGdk.GLContext], this function may call glFlush() implicitly before returning; it is not recommended to call glFlush() explicitly before calling this function.

This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

After a call to [methodGdk.DrawContext.begin_frame] this function will return a union of the region passed to that function and the area of the surface that the context determined needs to be repainted.

If context is not in between calls to [methodGdk.DrawContext.begin_frame] and [methodGdk.DrawContext.end_frame], %NULL will be returned.

The value can be:

• an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
• a #GValue initialized with the expected type of the property
• a #GValue initialized with a type to which the expected type of the property can be transformed

In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

This method is intended for language bindings. If writing in C, g_initable_new() should typically be used instead.

The object must be initialized before any real use after initial construction, either with this function or g_async_initable_init_async().

Implementations may also support cancellation. If cancellable is not %NULL, then initialization can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL and the object doesn't support cancellable initialization the error %G_IO_ERROR_NOT_SUPPORTED will be returned.

If the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. See the [introduction][ginitable] for more details.

Callers should not assume that a class which implements #GInitable can be initialized multiple times, unless the class explicitly documents itself as supporting this. Generally, a class’ implementation of init() can assume (and assert) that it will only be called once. Previously, this documentation recommended all #GInitable implementations should be idempotent; that recommendation was relaxed in GLib 2.54.

If a class explicitly supports being initialized multiple times, it is recommended that the method is idempotent: multiple calls with the same arguments should return the same results. Only the first call initializes the object; further calls return the result of the first call.

One reason why a class might need to support idempotent initialization is if it is designed to be used via the singleton pattern, with a #GObjectClass.constructor that sometimes returns an existing instance. In this pattern, a caller would expect to be able to call g_initable_init() on the result of g_object_new(), regardless of whether it is in fact a new instance.

This is the case between calls to [methodGdk.DrawContext.begin_frame] and [methodGdk.DrawContext.end_frame]. In this situation, drawing commands may be effecting the contents of the context's surface.

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

This function omits the property name lookup, hence it is faster than g_object_notify().

One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

  enum
  {
    PROP_0,
    PROP_FOO,
    PROP_LAST
  };

  static GParamSpec *properties[PROP_LAST];

  static void
  my_object_class_init (MyObjectClass *klass)
  {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
                                             0, 100,
                                             50,
                                             G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
                                     PROP_FOO,
                                     properties[PROP_FOO]);
  }

and then notify a change on the "foo" property with:

  g_object_notify_by_pspec (self, properties[PROP_FOO]);

Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

This function should only be called from object system implementations.

If the object already had an association with that name, the old association will be destroyed.

Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

void
object_add_to_user_list (GObject     *object,
                         const gchar *new_string)
{
  // the quark, naming the object data
  GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
  // retrieve the old string list
  GList *list = g_object_steal_qdata (object, quark_string_list);

  // prepend new string
  list = g_list_prepend (list, g_strdup (new_string));
  // this changed 'list', so we need to set it again
  g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
  GList *node, *list = data;

  for (node = list; node; node = node->next)
    g_free (node->data);
  g_list_free (list);
}

Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

It is an error to call this function when the freeze count is zero.

If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.

This method is intended for language bindings. If writing in C, g_initable_new() should typically be used instead.

The object must be initialized before any real use after initial construction, either with this function or g_async_initable_init_async().

Implementations may also support cancellation. If cancellable is not %NULL, then initialization can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL and the object doesn't support cancellable initialization the error %G_IO_ERROR_NOT_SUPPORTED will be returned.

If the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. See the [introduction][ginitable] for more details.

Callers should not assume that a class which implements #GInitable can be initialized multiple times, unless the class explicitly documents itself as supporting this. Generally, a class’ implementation of init() can assume (and assert) that it will only be called once. Previously, this documentation recommended all #GInitable implementations should be idempotent; that recommendation was relaxed in GLib 2.54.

If a class explicitly supports being initialized multiple times, it is recommended that the method is idempotent: multiple calls with the same arguments should return the same results. Only the first call initializes the object; further calls return the result of the first call.

One reason why a class might need to support idempotent initialization is if it is designed to be used via the singleton pattern, with a #GObjectClass.constructor that sometimes returns an existing instance. In this pattern, a caller would expect to be able to call g_initable_init() on the result of g_object_new(), regardless of whether it is in fact a new instance.

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.