Represents the D-Bus property "ActiveDevices".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "BitmapLocation".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "ChildConfiguration".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "ChunkSize".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "Degraded".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
If this property is not %G_BUS_TYPE_NONE, then #GDBusProxy:g-connection must be %NULL and will be set to the #GDBusConnection obtained by calling g_bus_get() with the value of this property.
The #GDBusConnection the proxy is for.
The timeout to use if -1 (specifying default timeout) is passed
as timeout_msec in the g_dbus_proxy_call() and
g_dbus_proxy_call_sync() functions.
This allows applications to set a proxy-wide timeout for all remote method invocations on the proxy. If this property is -1, the default timeout (typically 25 seconds) is used. If set to %G_MAXINT, then no timeout is used.
Flags from the #GDBusProxyFlags enumeration.
Ensure that interactions with this proxy conform to the given interface. This is mainly to ensure that malformed data received from the other peer is ignored. The given #GDBusInterfaceInfo is said to be the "expected interface".
The checks performed are:
When completing a method call, if the type signature of the reply message isn't what's expected, the reply is discarded and the #GError is set to %G_IO_ERROR_INVALID_ARGUMENT.
Received signals that have a type signature mismatch are dropped and a warning is logged via g_warning().
Properties received via the initial GetAll() call or via the
::PropertiesChanged signal (on the
org.freedesktop.DBus.Properties
interface) or set using g_dbus_proxy_set_cached_property()
with a type signature mismatch are ignored and a warning is
logged via g_warning().
Note that these checks are never done on methods, signals and properties that are not referenced in the given #GDBusInterfaceInfo, since extending a D-Bus interface on the service-side is not considered an ABI break.
The D-Bus interface name the proxy is for.
The well-known or unique name that the proxy is for.
The unique name that owns #GDBusProxy:g-name or %NULL if no-one currently owns that name. You may connect to #GObject::notify signal to track changes to this property.
The object path the proxy is for.
Represents the D-Bus property "Level".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "Name".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "NumDevices".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "Running".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "Size".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "SyncAction".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "SyncCompleted".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "SyncRate".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "SyncRemainingTime".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "UUID".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
Asynchronously invokes the method_name method on proxy.
If method_name contains any dots, then name is split into interface and
method name parts. This allows using proxy for invoking methods on
other interfaces.
If the #GDBusConnection associated with proxy is closed then
the operation will fail with %G_IO_ERROR_CLOSED. If
cancellable is canceled, the operation will fail with
%G_IO_ERROR_CANCELLED. If parameters contains a value not
compatible with the D-Bus protocol, the operation fails with
%G_IO_ERROR_INVALID_ARGUMENT.
If the parameters #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.:
g_dbus_proxy_call (proxy,
"TwoStrings",
g_variant_new ("(ss)",
"Thing One",
"Thing Two"),
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL,
(GAsyncReadyCallback) two_strings_done,
&data);
If proxy has an expected interface (see
#GDBusProxy:g-interface-info) and method_name is referenced by it,
then the return value is checked against the return type.
This is an asynchronous method. When the operation is finished,
callback will be invoked in the
[thread-default main context][g-main-context-push-thread-default]
of the thread you are calling this method from.
You can then call g_dbus_proxy_call_finish() to get the result of
the operation. See g_dbus_proxy_call_sync() for the synchronous
version of this method.
If callback is %NULL then the D-Bus method call message will be sent with
the %G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED flag set.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result of the method invocation.
Asynchronously invokes the AddDevice() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call udisks_mdraid_call_add_device_finish() to get the result of the operation.
See udisks_mdraid_call_add_device_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with udisks_mdraid_call_add_device().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to udisks_mdraid_call_add_device().
Synchronously invokes the AddDevice() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See udisks_mdraid_call_add_device() for the asynchronous version of this method.
Argument to pass with the method invocation.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the Delete() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call udisks_mdraid_call_delete_finish() to get the result of the operation.
See udisks_mdraid_call_delete_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with udisks_mdraid_call_delete().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to udisks_mdraid_call_delete().
Synchronously invokes the Delete() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See udisks_mdraid_call_delete() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Finishes an operation started with g_dbus_proxy_call().
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_proxy_call().
Asynchronously invokes the RemoveDevice() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call udisks_mdraid_call_remove_device_finish() to get the result of the operation.
See udisks_mdraid_call_remove_device_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with udisks_mdraid_call_remove_device().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to udisks_mdraid_call_remove_device().
Synchronously invokes the RemoveDevice() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See udisks_mdraid_call_remove_device() for the asynchronous version of this method.
Argument to pass with the method invocation.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the RequestSyncAction() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call udisks_mdraid_call_request_sync_action_finish() to get the result of the operation.
See udisks_mdraid_call_request_sync_action_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with udisks_mdraid_call_request_sync_action().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to udisks_mdraid_call_request_sync_action().
Synchronously invokes the RequestSyncAction() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See udisks_mdraid_call_request_sync_action() for the asynchronous version of this method.
Argument to pass with the method invocation.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the SetBitmapLocation() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call udisks_mdraid_call_set_bitmap_location_finish() to get the result of the operation.
See udisks_mdraid_call_set_bitmap_location_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with udisks_mdraid_call_set_bitmap_location().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to udisks_mdraid_call_set_bitmap_location().
Synchronously invokes the SetBitmapLocation() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See udisks_mdraid_call_set_bitmap_location() for the asynchronous version of this method.
Argument to pass with the method invocation.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the Start() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call udisks_mdraid_call_start_finish() to get the result of the operation.
See udisks_mdraid_call_start_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with udisks_mdraid_call_start().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to udisks_mdraid_call_start().
Synchronously invokes the Start() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See udisks_mdraid_call_start() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the Stop() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call udisks_mdraid_call_stop_finish() to get the result of the operation.
See udisks_mdraid_call_stop_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with udisks_mdraid_call_stop().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to udisks_mdraid_call_stop().
Synchronously invokes the Stop() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See udisks_mdraid_call_stop() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Synchronously invokes the method_name method on proxy.
If method_name contains any dots, then name is split into interface and
method name parts. This allows using proxy for invoking methods on
other interfaces.
If the #GDBusConnection associated with proxy is disconnected then
the operation will fail with %G_IO_ERROR_CLOSED. If
cancellable is canceled, the operation will fail with
%G_IO_ERROR_CANCELLED. If parameters contains a value not
compatible with the D-Bus protocol, the operation fails with
%G_IO_ERROR_INVALID_ARGUMENT.
If the parameters #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.:
g_dbus_proxy_call_sync (proxy,
"TwoStrings",
g_variant_new ("(ss)",
"Thing One",
"Thing Two"),
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL,
&error);
The calling thread is blocked until a reply is received. See g_dbus_proxy_call() for the asynchronous version of this method.
If proxy has an expected interface (see
#GDBusProxy:g-interface-info) and method_name is referenced by it,
then the return value is checked against the return type.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GCancellable or %NULL.
Like g_dbus_proxy_call() but also takes a #GUnixFDList object.
This method is only available on UNIX.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GUnixFDList or %NULL.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result of the method invocation.
Finishes an operation started with g_dbus_proxy_call_with_unix_fd_list().
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_proxy_call_with_unix_fd_list().
Like g_dbus_proxy_call_sync() but also takes and returns #GUnixFDList objects.
This method is only available on UNIX.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GUnixFDList or %NULL.
A #GCancellable or %NULL.
Helper function used in service implementations to finish handling invocations of the AddDevice() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the Delete() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the RemoveDevice() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the RequestSyncAction() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the SetBitmapLocation() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the Start() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the Stop() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Looks up the value for a property from the cache. This call does no blocking IO.
If proxy has an expected interface (see
#GDBusProxy:g-interface-info) and property_name is referenced by
it, then value is checked against the type of the property.
Property name.
Gets the names of all cached properties on proxy.
Gets the connection proxy is for.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Gets the timeout to use if -1 (specifying default timeout) is
passed as timeout_msec in the g_dbus_proxy_call() and
g_dbus_proxy_call_sync() functions.
See the #GDBusProxy:g-default-timeout property for more details.
Gets the flags that proxy was constructed with.
Gets D-Bus introspection information for the D-Bus interface
implemented by interface_.
Returns the #GDBusInterfaceInfo, if any, specifying the interface
that proxy conforms to. See the #GDBusProxy:g-interface-info
property for more details.
Gets the D-Bus interface name proxy is for.
Gets the name that proxy was constructed for.
When connected to a message bus, this will usually be non-%NULL. However, it may be %NULL for a proxy that communicates using a peer-to-peer pattern.
The unique name that owns the name that proxy is for or %NULL if
no-one currently owns that name. You may connect to the
#GObject::notify signal to track changes to the
#GDBusProxy:g-name-owner property.
Gets the #GDBusObject that interface_ belongs to, if any.
Gets the object path proxy is for.
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Initializes the object implementing the interface.
This method is intended for language bindings. If writing in C, g_initable_new() should typically be used instead.
The object must be initialized before any real use after initial construction, either with this function or g_async_initable_init_async().
Implementations may also support cancellation. If cancellable is not %NULL,
then initialization can be cancelled by triggering the cancellable object
from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL and
the object doesn't support cancellable initialization the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
If the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. See the [introduction][ginitable] for more details.
Callers should not assume that a class which implements #GInitable can be initialized multiple times, unless the class explicitly documents itself as supporting this. Generally, a class’ implementation of init() can assume (and assert) that it will only be called once. Previously, this documentation recommended all #GInitable implementations should be idempotent; that recommendation was relaxed in GLib 2.54.
If a class explicitly supports being initialized multiple times, it is recommended that the method is idempotent: multiple calls with the same arguments should return the same results. Only the first call initializes the object; further calls return the result of the first call.
One reason why a class might need to support idempotent initialization is if it is designed to be used via the singleton pattern, with a #GObjectClass.constructor that sometimes returns an existing instance. In this pattern, a caller would expect to be able to call g_initable_init() on the result of g_object_new(), regardless of whether it is in fact a new instance.
optional #GCancellable object, %NULL to ignore.
Starts asynchronous initialization of the object implementing the interface. This must be done before any real use of the object after initial construction. If the object also implements #GInitable you can optionally call g_initable_init() instead.
This method is intended for language bindings. If writing in C, g_async_initable_new_async() should typically be used instead.
When the initialization is finished, callback will be called. You can
then call g_async_initable_init_finish() to get the result of the
initialization.
Implementations may also support cancellation. If cancellable is not
%NULL, then initialization can be cancelled by triggering the cancellable
object from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL, and
the object doesn't support cancellable initialization, the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
As with #GInitable, if the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. They will often fail with g_critical() or g_warning(), but this must not be relied on.
Callers should not assume that a class which implements #GAsyncInitable can be initialized multiple times; for more information, see g_initable_init(). If a class explicitly supports being initialized multiple times, implementation requires yielding all subsequent calls to init_async() on the results of the first call.
For classes that also support the #GInitable interface, the default implementation of this method will run the g_initable_init() function in a thread, so if you want to support asynchronous initialization via threads, just implement the #GAsyncInitable interface without overriding any interface methods.
the [I/O priority][io-priority] of the operation
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
Finishes asynchronous initialization and returns the result. See g_async_initable_init_async().
a #GAsyncResult.
Checks whether object has a [floating][floating-ref] reference.
Finishes the async construction for the various g_async_initable_new calls, returning the created object or %NULL on error.
the #GAsyncResult from the callback
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
If value is not %NULL, sets the cached value for the property with
name property_name to the value in value.
If value is %NULL, then the cached value is removed from the
property cache.
If proxy has an expected interface (see
#GDBusProxy:g-interface-info) and property_name is referenced by
it, then value is checked against the type of the property.
If the value #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.
g_dbus_proxy_set_cached_property (proxy,
"SomeProperty",
g_variant_new ("(si)",
"A String",
42));
Normally you will not need to use this method since proxy
is tracking changes using the
org.freedesktop.DBus.Properties.PropertiesChanged
D-Bus signal. However, for performance reasons an object may
decide to not use this signal for some properties and instead
use a proprietary out-of-band mechanism to transmit changes.
As a concrete example, consider an object with a property
ChatroomParticipants which is an array of strings. Instead of
transmitting the same (long) array every time the property changes,
it is more efficient to only transmit the delta using e.g. signals
ChatroomParticipantJoined(String name) and
ChatroomParticipantParted(String name).
Property name.
Value for the property or %NULL to remove it from the cache.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Sets the timeout to use if -1 (specifying default timeout) is
passed as timeout_msec in the g_dbus_proxy_call() and
g_dbus_proxy_call_sync() functions.
See the #GDBusProxy:g-default-timeout property for more details.
Timeout in milliseconds.
Ensure that interactions with proxy conform to the given
interface. See the #GDBusProxy:g-interface-info property for more
details.
Minimum interface this proxy conforms to or %NULL to unset.
Sets the #GDBusObject for interface_ to object.
Note that interface_ will hold a weak reference to object.
A #GDBusObject or %NULL.
Sets a property on an object.
the name of the property to set
the value
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
Gets the #GDBusObject that interface_ belongs to, if any.
Gets D-Bus introspection information for the D-Bus interface
implemented by interface_.
Initializes the object implementing the interface.
This method is intended for language bindings. If writing in C, g_initable_new() should typically be used instead.
The object must be initialized before any real use after initial construction, either with this function or g_async_initable_init_async().
Implementations may also support cancellation. If cancellable is not %NULL,
then initialization can be cancelled by triggering the cancellable object
from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL and
the object doesn't support cancellable initialization the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
If the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. See the [introduction][ginitable] for more details.
Callers should not assume that a class which implements #GInitable can be initialized multiple times, unless the class explicitly documents itself as supporting this. Generally, a class’ implementation of init() can assume (and assert) that it will only be called once. Previously, this documentation recommended all #GInitable implementations should be idempotent; that recommendation was relaxed in GLib 2.54.
If a class explicitly supports being initialized multiple times, it is recommended that the method is idempotent: multiple calls with the same arguments should return the same results. Only the first call initializes the object; further calls return the result of the first call.
One reason why a class might need to support idempotent initialization is if it is designed to be used via the singleton pattern, with a #GObjectClass.constructor that sometimes returns an existing instance. In this pattern, a caller would expect to be able to call g_initable_init() on the result of g_object_new(), regardless of whether it is in fact a new instance.
optional #GCancellable object, %NULL to ignore.
Starts asynchronous initialization of the object implementing the interface. This must be done before any real use of the object after initial construction. If the object also implements #GInitable you can optionally call g_initable_init() instead.
This method is intended for language bindings. If writing in C, g_async_initable_new_async() should typically be used instead.
When the initialization is finished, callback will be called. You can
then call g_async_initable_init_finish() to get the result of the
initialization.
Implementations may also support cancellation. If cancellable is not
%NULL, then initialization can be cancelled by triggering the cancellable
object from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL, and
the object doesn't support cancellable initialization, the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
As with #GInitable, if the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. They will often fail with g_critical() or g_warning(), but this must not be relied on.
Callers should not assume that a class which implements #GAsyncInitable can be initialized multiple times; for more information, see g_initable_init(). If a class explicitly supports being initialized multiple times, implementation requires yielding all subsequent calls to init_async() on the results of the first call.
For classes that also support the #GInitable interface, the default implementation of this method will run the g_initable_init() function in a thread, so if you want to support asynchronous initialization via threads, just implement the #GAsyncInitable interface without overriding any interface methods.
the [I/O priority][io-priority] of the operation
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
Finishes asynchronous initialization and returns the result. See g_async_initable_init_async().
a #GAsyncResult.
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
Sets the #GDBusObject for interface_ to object.
Note that interface_ will hold a weak reference to object.
A #GDBusObject or %NULL.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Asynchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.MDRaid. See g_dbus_proxy_new() for more details.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call udisks_mdraid_proxy_new_finish() to get the result of the operation.
See udisks_mdraid_proxy_new_sync() for the synchronous, blocking version of this constructor.
A #GDBusConnection.
Flags from the #GDBusProxyFlags enumeration.
A bus name (well-known or unique) or %NULL if connection is not a message bus connection.
An object path.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied.
Creates a proxy for accessing interface_name on the remote object
at object_path owned by name at connection and asynchronously
loads D-Bus properties unless the
%G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES flag is used. Connect to
the #GDBusProxy::g-properties-changed signal to get notified about
property changes.
If the %G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS flag is not set, also sets up match rules for signals. Connect to the #GDBusProxy::g-signal signal to handle signals from the remote object.
If both %G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES and %G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS are set, this constructor is guaranteed to complete immediately without blocking.
If name is a well-known name and the
%G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START and %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION
flags aren't set and no name owner currently exists, the message bus
will be requested to launch a name owner for the name.
This is a failable asynchronous constructor - when the proxy is
ready, callback will be invoked and you can use
g_dbus_proxy_new_finish() to get the result.
See g_dbus_proxy_new_sync() and for a synchronous version of this constructor.
#GDBusProxy is used in this [example][gdbus-wellknown-proxy].
A #GDBusConnection.
Flags used when constructing the proxy.
A #GDBusInterfaceInfo specifying the minimal interface that proxy conforms to or %NULL.
A bus name (well-known or unique) or %NULL if connection is not a message bus connection.
An object path.
A D-Bus interface name.
A #GCancellable or %NULL.
Callback function to invoke when the proxy is ready.
Finishes an operation started with udisks_mdraid_proxy_new().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to udisks_mdraid_proxy_new().
Finishes creating a #GDBusProxy.
A #GAsyncResult obtained from the #GAsyncReadyCallback function passed to g_dbus_proxy_new().
Like udisks_mdraid_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call udisks_mdraid_proxy_new_for_bus_finish() to get the result of the operation.
See udisks_mdraid_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
A #GBusType.
Flags from the #GDBusProxyFlags enumeration.
A bus name (well-known or unique).
An object path.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied.
Like g_dbus_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
#GDBusProxy is used in this [example][gdbus-wellknown-proxy].
A #GBusType.
Flags used when constructing the proxy.
A #GDBusInterfaceInfo specifying the minimal interface that proxy conforms to or %NULL.
A bus name (well-known or unique).
An object path.
A D-Bus interface name.
A #GCancellable or %NULL.
Callback function to invoke when the proxy is ready.
Finishes an operation started with udisks_mdraid_proxy_new_for_bus().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to udisks_mdraid_proxy_new_for_bus().
Finishes creating a #GDBusProxy.
A #GAsyncResult obtained from the #GAsyncReadyCallback function passed to g_dbus_proxy_new_for_bus().
Like udisks_mdraid_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
The calling thread is blocked until a reply is received.
See udisks_mdraid_proxy_new_for_bus() for the asynchronous version of this constructor.
A #GBusType.
Flags from the #GDBusProxyFlags enumeration.
A bus name (well-known or unique).
An object path.
A #GCancellable or %NULL.
Like g_dbus_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
#GDBusProxy is used in this [example][gdbus-wellknown-proxy].
A #GBusType.
Flags used when constructing the proxy.
A #GDBusInterfaceInfo specifying the minimal interface that proxy conforms to or %NULL.
A bus name (well-known or unique).
An object path.
A D-Bus interface name.
A #GCancellable or %NULL.
Synchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.MDRaid. See g_dbus_proxy_new_sync() for more details.
The calling thread is blocked until a reply is received.
See udisks_mdraid_proxy_new() for the asynchronous version of this constructor.
A #GDBusConnection.
Flags from the #GDBusProxyFlags enumeration.
A bus name (well-known or unique) or %NULL if connection is not a message bus connection.
An object path.
A #GCancellable or %NULL.
Creates a proxy for accessing interface_name on the remote object
at object_path owned by name at connection and synchronously
loads D-Bus properties unless the
%G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES flag is used.
If the %G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS flag is not set, also sets up match rules for signals. Connect to the #GDBusProxy::g-signal signal to handle signals from the remote object.
If both %G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES and %G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS are set, this constructor is guaranteed to return immediately without blocking.
If name is a well-known name and the
%G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START and %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION
flags aren't set and no name owner currently exists, the message bus
will be requested to launch a name owner for the name.
This is a synchronous failable constructor. See g_dbus_proxy_new() and g_dbus_proxy_new_finish() for the asynchronous version.
#GDBusProxy is used in this [example][gdbus-wellknown-proxy].
A #GDBusConnection.
Flags used when constructing the proxy.
A #GDBusInterfaceInfo specifying the minimal interface that proxy conforms to or %NULL.
A bus name (well-known or unique) or %NULL if connection is not a message bus connection.
An object path.
A D-Bus interface name.
A #GCancellable or %NULL.
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
The #UDisksMDRaidProxy structure contains only private data and should only be accessed using the provided API.