Class WaylandDisplay

Whenever the source_property is changed the target_property is updated using the same value. For instance:

  g_object_bind_property (action, "active", widget, "sensitive", 0);

Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

A #GObject can have multiple bindings.

This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

This cleans up associated resources.

The context is disconnected from any particular surface or surface and cannot be used to draw to any surface. It can only be used to draw to non-surface framebuffers like textures.

If the creation of the GdkGLContext failed, error will be set. Before using the returned GdkGLContext, you will need to call [methodGdk.GLContext.make_current] or [methodGdk.GLContext.realize].

This happens automatically when the main loop blocks waiting for new events, but if your application is drawing without returning control to the main loop, you may need to call this function explicitly. A common case where this function needs to be called is when an application is executing drawing commands from a thread other than the thread where the main loop is running.

This is most useful for X11. On windowing systems where requests are handled synchronously, this function will do nothing.

This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

Note that a display may not have a seat. In this case, this function will return %NULL.

Returns a monitor close to surface if it is outside of all monitors.

Subsequent calls to this function will always return the same list for the same display.

You can listen to the GListModel::items-changed signal on this list to monitor changes to the monitor of this display.

On backends where the primary clipboard is not supported natively, GDK emulates this clipboard locally.

The value can be:

• an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
• a #GValue initialized with the expected type of the property
• a #GValue initialized with a type to which the expected type of the property can be transformed

In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

Check [methodGdk.Display.is_rgba] for whether the display supports an alpha channel.

On X11 this function returns whether a compositing manager is compositing on display.

On modern displays, this value is always %TRUE.

Even if a %TRUE is returned, it is possible that the surface’s alpha channel won’t be honored when displaying the surface on the screen: in particular, for X an appropriate windowing manager and compositing manager must be running to provide appropriate display. Use [methodGdk.Display.is_composited] to check if that is the case.

On modern displays, this value is always %TRUE.

The Nth GdkKeymapKey in keys is bound to the Nth keyval in keyvals.

When a keycode is pressed by the user, the keyval from this list of entries is selected by considering the effective keyboard group and level.

Free the returned arrays with g_free().

Groups and levels are two kinds of keyboard mode; in general, the level determines whether the top or bottom symbol on a key is used, and the group determines whether the left or right symbol is used.

On US keyboards, the shift key changes the keyboard level, and there are no groups. A group switch key might convert a keyboard between Hebrew to English modes, for example.

GdkEventKey contains a %group field that indicates the active keyboard group. The level is computed from the modifier mask.

The returned array should be freed with g_free().

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

This function omits the property name lookup, hence it is faster than g_object_notify().

One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

  enum
  {
    PROP_0,
    PROP_FOO,
    PROP_LAST
  };

  static GParamSpec *properties[PROP_LAST];

  static void
  my_object_class_init (MyObjectClass *klass)
  {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
                                             0, 100,
                                             50,
                                             G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
                                     PROP_FOO,
                                     properties[PROP_FOO]);
  }

and then notify a change on the "foo" property with:

  g_object_notify_by_pspec (self, properties[PROP_FOO]);

GTK will call this function automatically for [classGtk.Window] with custom startup-notification identifier unless [methodGtk.Window.set_auto_startup_notification] is called to disable that feature.

Note that even if this function succeeds, creating a GdkGLContext may still fail.

This function is idempotent. Calling it multiple times will just return the same value or error.

You never need to call this function, GDK will call it automatically as needed. But you can use it as a check when setting up code that might make use of OpenGL.

This function is only useful in very special situations and should not be used by applications.

Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

This function should only be called from object system implementations.

If the object already had an association with that name, the old association will be destroyed.

Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

void
object_add_to_user_list (GObject     *object,
                         const gchar *new_string)
{
  // the quark, naming the object data
  GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
  // retrieve the old string list
  GList *list = g_object_steal_qdata (object, quark_string_list);

  // prepend new string
  list = g_list_prepend (list, g_strdup (new_string));
  // this changed 'list', so we need to set it again
  g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
  GList *node, *list = data;

  for (node = list; node; node = node->next)
    g_free (node->data);
  g_list_free (list);
}

Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

This means that [methodGdk.Surface.set_input_region] can be used to modify the input shape of surfaces on display.

On modern displays, this value is always %TRUE.

This is often used for making sure that the display is synchronized with the current state of the program. Calling [methodGdk.Display.sync] before [methodGdkX11.Display.error_trap_pop] makes sure that any errors generated from earlier requests are handled before the error trap is removed.

This is most useful for X11. On windowing systems where requests are handled synchronously, this function will do nothing.

Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

It is an error to call this function when the freeze count is zero.

Modifiers that affected the translation and are thus unavailable for application use are returned in consumed_modifiers.

The effective_group is the group that was actually used for the translation; some keys such as Enter are not affected by the active keyboard group. The level is derived from state.

consumed_modifiers gives modifiers that should be masked out from state when comparing this key press to a keyboard shortcut. For instance, on a US keyboard, the plus symbol is shifted, so when comparing a key press to a <Control>plus accelerator <Shift> should be masked out.

This function should rarely be needed, since GdkEventKey already contains the translated keyval. It is exported for the benefit of virtualized test environments.

If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.